Division BAT-associated emission levels
United Kingdom
See Table 9.
Table 9
BAT-associated emission levels for NOx from flue-gases of kiln firing processes in the lime industry
| The higher ends of the ranges are related to the production of dolime and hard burned lime. Higher levels than the upper end of the range may be associated with the production of sintered dolime. | ||
| For LRK and PRK with shaft producing hard burned lime, the upper level is up to 800 mg/Nm3 | ||
| Where primary techniques as indicated in BAT 45 (a)I are not sufficient to reach this level and where secondary techniques are not applicable to reduce the NOx emissions to 350 mg/Nm3, the upper level is 500 mg/Nm3, especially for hard burned lime and for the use of biomass as fuel. | ||
| Kiln type | Unit | BAT-AEL(daily average value or average over the sampling period (spot measurements for at least half an hour), stated as NO2) |
|---|---|---|
| PFRK, ASK, MFSK, OSK | mg/Nm3 | 100 – 350f1 f2 |
| LRK, PRK | mg/Nm3 | < 200 – 500 f3 |
Annotations
Footnotes
- f1
-
The higher ends of the ranges are related to the production of dolime and hard burned lime. Higher levels than the upper end of the range may be associated with the production of sintered dolime.
- f2
-
Where primary techniques as indicated in BAT 45 (a)I are not sufficient to reach this level and where secondary techniques are not applicable to reduce the NOx emissions to 350 mg/Nm3, the upper level is 500 mg/Nm3, especially for hard burned lime and for the use of biomass as fuel.
- f3
-
For LRK and PRK with shaft producing hard burned lime, the upper level is up to 800 mg/Nm3
Notes on Division 45
Footnotes
- f1
-
A description of the techniques is provided in Section 1.6.2