OpenLegislation

Division BAT-associated emission levels

United Kingdom

Original text. Later amendments are not shown.

See Table 15.

Table 15

BAT-associated emission levels for SOx from flue-gases of kiln firing processes in the magnesia industry

The BAT-AELs depend on the content of sulphur in the raw materials and fuels. The lower end of the range is associated with the use of raw materials with low sulphur content and the use of natural gas; the upper end of the range is associated with the use of raw materials with higher sulphur content and/or the use of sulphur-containing fuels.

Cross-media effects should be taken into account to assess the best combination of BAT to reduce SOx emissions.

When a wet scrubber is not applicable, BAT-AELs depend on the sulphur content of raw materials and fuels. In this case, the BAT-AEL is < 1 500 mg/Nm3 while ensuring a SOX emissions removal efficiency of at least 60 %.

ParameterUnitBAT-AELf1 f2(daily average value or average over the sampling period (spot measurements for at least half an hour))
SOX expressed as SO2 mg/Nm3 < 50 – 400f3

Annotations

Footnotes

f1

The BAT-AELs depend on the content of sulphur in the raw materials and fuels. The lower end of the range is associated with the use of raw materials with low sulphur content and the use of natural gas; the upper end of the range is associated with the use of raw materials with higher sulphur content and/or the use of sulphur-containing fuels.

f2

Cross-media effects should be taken into account to assess the best combination of BAT to reduce SOx emissions.

f3

When a wet scrubber is not applicable, BAT-AELs depend on the sulphur content of raw materials and fuels. In this case, the BAT-AEL is < 1 500 mg/Nm3 while ensuring a SOX emissions removal efficiency of at least 60 %.

Notes on Division 65

Footnotes

f1

A description of the measure/technique is provided in Section 1.7.2