Commission Implementing Decision (EU) 2019/1004 of 7 June 2019 laying down rules for the calculation, verification and reporting of data on waste in accordance with Directive 2008/98/EC of the European Parliament and of the Council and repealing Commission Implementing Decision C(2012) 2384 (notified under document C(2019) 4114) (Text with EEA relevance) (revoked)

EU Decision 2019/1004 · Adopted 7 June 2019 · Extends to United Kingdom

Contents

1. 1Definitions Repealed
2. 2Calculating municipal waste that is prepared for re-use pursuant to Article 11a(1) of Directive 2008/98/EC Repealed
3. 3Calculating recycled municipal waste pursuant to Article 11a(1), Article 11a(2) and Article 11a(5) of Directive 2008/98/EC Repealed
4. 4Calculating recycled municipal bio-waste pursuant to Article 11a(4) of Directive 2008/98/EC Repealed
5. 5Calculating recycled metals separated after incineration of municipal waste pursuant to Article 11a(6) of Directive 2008/98/EC Repealed
6. 6Data collection Repealed
7. 7Reporting of data Repealed
8. 8Repeal Repealed
9. 9Transitional provisions Repealed
10. 10Article 10 Repealed
11. Signature
12. Annex ICALCULATION POINTS REFERRED TO IN ARTICLE 3(2) Repealed
13. Annex II: METHODOLOGY FOR CALCULATING MUNICIPAL BIO-WASTE SEPARATED AND RECYCLED AT SOURCE REFERRED TO IN ARTICLE 4(3) Repealed
14. 1The amount of municipal bio-waste separated and recycled at source shall be calculated by using the following formula: Repealed
15. 2Division 2 Repealed
16. 3Division 3 Repealed
17. 4Direct measurement requires measuring the input to the active recycling unit or its output under the following conditions: Repealed
18. 5Indirect measurement requires measuring the following amounts through composition surveys of collected municipal waste, which take account of municipal bio-waste waste that is separately collected and of municipal bio-waste that is not separately collected: Repealed
19. 6The methodology to determine the amount of municipal bio-waste that is separated and recycled at source per active recycling unit pursuant to points 3 to 5, in particular the sampling methods used in surveys to collect data, shall reflect at least the following factors: Repealed
20. 7Where the share of municipal bio-waste separated and recycled at source in all municipal waste generated is less than 5 % at national level, Member States may use a simplified methodology to calculate municipal bio-waste separated and recycled at source by applying the following formula: Repealed
21. 8For the purposes of applying the formula laid down in point 7 Member States shall ensure that: Repealed
22. 9Division 9 Repealed
23. 10The surveys to collect data for the purposes of applying the formulas laid down in this Annex shall be carried out for the first year of reporting on municipal bio-waste separated and recycled at source and thereafter at least every five years, and for other years whenever there are reasons to expect significant changes in the amount of municipal bio-waste separated and recycled at source. Repealed
24. 11Division 11 Repealed
25. 12Division 12 Repealed
26. Annex III: METHODOLOGY FOR CALCULATING RECYCLED METALS SEPARATED AFTER INCINERATION OF MUNICIPAL WASTE REFERRED TO IN ARTICLE 5(2) Repealed
27. 1The following definitions shall apply in relation to the formulas set out in this Annex: Repealed
28. 2Following the separation of metal concentrate from raw incineration bottom ash, the total mass of metals in incineration bottom ash in a given year shall be calculated by applying the following formula: Repealed
29. 3Division 3 Repealed
30. 4The concentration of metals in metal concentrates shall be calculated by using data collected by regular surveys from facilities that treat metal concentrates and deliver their output to facilities producing metal products. Distinction shall be made between ferrous metals, non-ferrous metals and stainless steel. The following formula shall be applied in order to calculate the concentration of metals in metal concentrates: Repealed
31. 5Where municipal waste is incinerated together with other waste, the concentration of metals in the incinerated waste from various sources shall be determined through a sampling survey of the waste that enters the incineration operation. This survey shall be carried out at least every five years and whenever there are reasons to expect that the composition of the waste has significantly changed. The mass of metals originating from municipal waste shall be calculated by applying the following formula: Repealed
32. 6By way of derogation from point 5, where the share of municipal waste in all incinerated waste is above 75 %, the mass of metals originating from municipal waste may be calculated by applying the following formula: Repealed
33. Annex IV: DATA ON WASTE FROM HOUSEHOLDS AND SIMILAR WASTE FROM OTHER ORIGINS, AND DATA ON CONSTRUCTION AND DEMOLITION WASTE REFERRED TO IN ARTICLE 7(1) Repealed
34. AFORMAT FOR THE REPORTING OF DATA ON THE IMPLEMENTATION OF POINT (A) OF ARTICLE 11(2) OF DIRECTIVE 2008/98/EC CONCERNING PREPARING FOR RE-USE AND RECYCLING OF WASTE FROM HOUSEHOLDS AND OF SIMILAR WASTE FROM OTHER ORIGINS Repealed
35. FORMAT FOR THE QUALITY CHECK REPORT ACCOMPANYING THE DATA REFERRED TO IN PART A Repealed
36. IObjective of the report Repealed
37. General information Repealed
38. 1Division 1 Repealed
39. 2Division 2 Repealed
40. 3Division 3 Repealed
41. 4Division 4 Repealed
42. 5Division 5 Repealed
43. Information on waste from households and similar waste from other origins Repealed
44. 1Division 1 Repealed
45. 2Division 2 Repealed
46. 3Division 3 Repealed
47. 4Division 4 Repealed
48. 5Division 5 Repealed
49. 6Division 6 Repealed
50. 7Division 7 Repealed
51. 8Division 8 Repealed
52. 9Division 9 Repealed
53. CFORMAT FOR REPORTING OF DATA ON THE IMPLEMENTATION OF POINT (B) OF ARTICLE 11(2) OF DIRECTIVE 2008/98/EC CONCERNING CONSTRUCTION AND DEMOLITION WASTE Repealed
54. FORMAT FOR THE QUALITY CHECK REPORT ACCOMPANYING THE DATA REFERRED TO IN PART C Repealed
55. IObjective of the report Repealed
56. General information Repealed
57. 1Division 1 Repealed
58. 2Division 2 Repealed
59. 3Division 3 Repealed
60. 4Division 4 Repealed
61. 5Division 5 Repealed
62. Information on construction and demolition waste Repealed
63. 1Division 1 Repealed
64. 2Division 2 Repealed
65. 3Division 3 Repealed
66. 4Division 4 Repealed
67. 5Division 5 Repealed
68. 6Division 6 Repealed
69. Annex V: DATA ON MUNICIPAL WASTE REFERRED TO IN ARTICLE 7(2) Repealed
70. AFORMAT FOR THE REPORTING OF DATA Repealed
71. FORMAT FOR THE QUALITY CHECK REPORT ACCOMPANYING THE DATA REFERRED TO IN PART A Repealed
72. IObjectives of the report Repealed
73. General information Repealed
74. 1Division 1 Repealed
75. 2Division 2 Repealed
76. 3Division 3 Repealed
77. 4Division 4 Repealed
78. 5Division 5 Repealed
79. 6Division 6 Repealed
80. Information on municipal waste Repealed
81. 1Description of the entities involved in the data collection Repealed
82. 2Division 2 Repealed
83. Description of methods used Repealed
84. Municipal waste generation Repealed
85. 3.1.1Methods for determining municipal waste generation (mark with a cross or specify in the last column) Repealed
86. 3.1.2Description of the methodology used to operationalise the definition of municipal waste in the national data collection systems, including the methodology used to collect data on the non-household fraction of municipal waste Repealed
87. 3.1.3Statistical codes, use of waste codes and verification of data on municipal waste generation Repealed
88. 3.1.4Methods used to estimate the composition of mixed municipal waste generated per material Repealed
89. 3.1.5Estimated share of waste generated by households in municipal waste (in %) and description how that estimate was calculated Repealed
90. 3.1.6Division 3.1.6 Repealed
91. 3.1.7Explanation of estimates used to cover gaps in data on generated municipal waste as regards the amounts of waste generated by households (for instance, due to incomplete coverage of households by the collection systems) and of similar waste (for instance, due to incomplete coverage of similar waste by data on waste collection) Repealed
92. 3.1.8Differences from data reported in previous years Repealed
93. Municipal waste management Repealed
94. 3.2.1Classification of treatment operations Repealed
95. 3.2.2Description of methods for determining the amount of municipal waste treated (mark with a cross) Repealed
96. 3.2.3Preparing for re-use Repealed
97. 3.2.4Description of applied measurement points for recycling, for instance at the calculation point, at the output of a sorting operation with subtraction of non-target materials as appropriate, and of end-of-waste criteria, etc., including variation at regional and local level and for household and similar waste where relevant Repealed
98. 3.2.5Description of the methodology used to determine per material the amount of recycled materials contained in waste items composed of multiple materials Repealed
99. 3.2.6Use of Average Loss Rates (ALRs) Repealed
100. 3.2.7Attribution of waste to municipal sources and non-municipal sources at the measurement point Repealed
101. 3.2.8Attribution of waste to different Member States at the measurement point Repealed
102. 3.2.9Recycling of municipal bio-waste that is not separately collected or separated and recycled at source (relevant until 2026) Repealed
103. 3.2.10Municipal bio-waste separated and recycled at source Repealed
104. 3.2.11Calculation of recycled metals separated after incineration of municipal waste Repealed
105. 3.2.12Other recovery of waste Repealed
106. 3.2.13Information on the relevance of temporary storage of waste to amounts of treated waste in a given year and any estimates of waste recycled in the current reference year following temporary storage in a previous reference year(s), and waste going to temporary storage in the current reference year Repealed
107. 3.2.14Differences from the data reported for the previous reference years Repealed
108. 3.2.15Verification of data on recycling of municipal waste Repealed
109. Accuracy of the data Repealed
110. 4.1.1Description of main issues affecting the accuracy of data on the generation and treatment of municipal waste, including errors related to sampling, coverage, measurement, processing and non-response Repealed
111. 4.1.2Explanation of the scope and validity of surveys to collect data on the generation and treatment of municipal waste Repealed
112. 4.1.3Statistical surveys used regarding municipal waste generation and treatment Repealed
113. IVConfidentiality Repealed
114. VMain national websites, reference documents and publications Repealed
115. FORMAT FOR THE REPORT ON THE MEASURES TAKEN PURSUANT TO ARTICLE 11A(3) AND ARTICLE 11A(8) OF DIRECTIVE 2008/98/EC Repealed
116. 1Detailed description of the system for quality control and traceability of municipal waste referred to in Article 11a(3) and Article 11a(8) of Directive 2008/98/EC Repealed
117. 2Quality control and traceability of municipal waste treated outside the Member State Repealed
118. 3Division 3 Repealed
119. Annex VI: DATA ON MINERAL AND SYNTHETIC LUBRICATION AND INDUSTRIAL OILS AND WASTE OILS REFERRED TO IN ARTICLE 7(3) Repealed
120. AFORMAT FOR THE REPORTING OF DATA Repealed
121. FORMAT FOR THE QUALITY CHECK REPORT ACCOMPANYING THE DATA REFERRED TO IN PART A Repealed
122. General information Repealed
123. 1Division 1 Repealed
124. 2Division 2 Repealed
125. 3Division 3 Repealed
126. 4Division 4 Repealed
127. 5Division 5 Repealed
128. 6Division 6 Repealed
129. Information on oils placed on the market and waste oils Repealed
130. 1Data collection methods (the relevant column should be marked with a cross, the last column should be filled-in) Repealed
131. 2Description of the methodology used to determine the amount of waste oil generated Repealed
132. 3Description of the method used to determine the dry oil content of the waste oil (e.g. chemical analysis of the water content, expert knowledge, etc.) Repealed
133. 4Description of the outputs of treated waste oils reported under the category ‘other recycling’ and an indication of their amounts Repealed
134. 5Description of the method used to determine the amount of base oils used as fuel Repealed
135. 6Data on waste oil treatment outside the Member State Repealed
136. 7Detailed description of the specific measures for quality control and traceability of waste oils, in particular, as regards monitoring and validation of data Repealed
137. 8Description of the data sources for treatment of waste oils in another Member State or outside the Union (e.g. Regulation (EC) No 1013/2006 or primary data from the treatment operator) and the quality of the data Repealed
138. 9Description of any difficulties in collecting data from treatment operators located in another Member State or outside the Union Repealed
139. 10Description of measures to ensure that the exporter of waste oils outside the Union can prove that the shipment of waste complies with the requirements of Regulation (EC) No 1013/2006 and that the treatment of waste outside the Union took place in conditions that are broadly equivalent to the requirements of the relevant Union environmental law Repealed
140. Accuracy of the data Repealed
141. 11.1Description of main issues affecting the quality and accuracy of data on the generation, collection and treatment of waste oils, including errors related to sampling, coverage, measurement, processing and non-response Repealed
142. 11.2Completeness of the data collection on mineral and synthetic lubrication and industrial oils and waste oils Repealed
143. 11.3Differences from previous reference year's data Repealed
144. IIIConfidentiality Repealed
145. IVMain national websites, reference documents and publications Repealed