OpenLegislation

Division BAT 14 In order to reduce VOC emissions from the production and storage areas, BAT is to use technique (a) and an appropriate combination of the other techniques given below.

United Kingdom

Original text. Later amendments are not shown.

TechniqueDescriptionApplicability
(a)System selection, design and optimisation

An off-gas system is selected, designed and optimised taking into account parameters such as:

  • amount of extracted air;

  • type and concentration of solvents in extracted air;

  • type of treatment system (dedicated/centralised);

  • health and safety;

  • energy efficiency.

The following order of priority for the system selection may be considered:

  • segregation of off-gases with high and low VOC concentrations;

  • techniques to homogenise and increase the VOC concentration (see BAT 16 (b) and (c));

  • techniques for the recovery of solvents in off-gases (see BAT 15);

  • VOC abatement techniques with heat recovery (see BAT 15);

  • VOC abatement techniques without heat recovery (see BAT 15).

Generally applicable.
(b)Air extraction as close as possible to the point of application of VOC-containing materialsAir extraction as close as possible to the point of application with full or partial enclosure of solvent application areas (e.g. coaters, application machines, spray booths). Extracted air may be treated by an off-gas treatment system.

May not be applicable where enclosure leads to difficult machinery access during operation.

Applicability may be restricted by the shape and size of the area to be enclosed.

(c)Air extraction as close as possible to the point of preparing paints/coatings/adhesives/inksAir extraction as close as possible to the point of preparing paints/coatings/adhesives/inks (e.g. mixing area). Extracted air may be treated by an off-gas treatment system.Only applicable where paints/coatings/adhesives/inks are prepared.
(d)Extraction of air from the drying/curing processesThe curing ovens/dryers are equipped with an air extraction system. Extracted air may be treated by an off-gas treatment system.Only applicable to drying/curing processes.
(e)Minimisation of fugitive emissions and heat losses from the ovens/dryers either by sealing the entrance and the exit of the curing ovens/dryers or by applying sub-atmospheric pressure in dryingThe entrance to and the exit from curing ovens/dryers are sealed to minimise fugitive VOC emissions and heat losses. The sealing may be ensured by air jets or air knives, doors, plastic or metallic curtains, doctor blades, etc. Alternatively, ovens/dryers are kept under sub-atmospheric pressure.Only applicable when curing ovens/dryers are used.
(f)Extraction of air from the cooling zoneWhen substrate cooling takes place after drying/curing, the air from the cooling zone is extracted and may be treated by an off-gas treatment system.Only applicable when substrate cooling takes place after drying/curing.
(g)Extraction of air from storage of raw materials, solvents and solvent-containing wastesAir from raw material stores and/or individual containers for raw materials, solvents and solvent-containing wastes is extracted and may be treated by an off-gas treatment system.May not be applicable for closed containers or for storage of raw materials, solvents and solvent-containing wastes with a low vapour pressure and low toxicity.
(h)Extraction of air from cleaning areasAir from the areas where machine parts and equipment are cleaned with organic solvents, either by hand or automatically, is extracted and may be treated by an off-gas treatment system.Only applicable to areas where machine parts and equipment are cleaned with organic solvents.