OpenLegislation

Division BAT 16 In order to reduce the energy consumption of the VOC abatement system, BAT is to use one or a combination of the techniques given below.

United Kingdom

Original text. Later amendments are not shown.

TechniqueDescriptionApplicability
(a)Maintaining the VOC concentration sent to the off-gas treatment system by using variable-frequency drive fansUse of a variable-frequency drive fan with centralised off-gas treatment systems to modulate the airflow to match the exhaust from the equipment that may be in operation.Only applicable to central thermal off-gas treatment systems in batch processes such as printing.
(b)Internal concentration of solvents in the off-gasesOff-gases are recirculated within the process (internally) in the curing ovens/dryers and/or in spray booths, so the VOC concentration in the off-gases increases and the abatement efficiency of the off-gas treatment system increases.Applicability may be limited by health and safety factors such as the LEL, and product quality requirements or specifications.
(c)External concentration of solvents in the off-gases through adsorption

The concentration of solvent in off-gases is increased by a continuous circular flow of the spray booth process air, possibly combined with curing oven/dryer off-gases, through adsorption equipment. This equipment can include:

  • fixed bed adsorber with activated carbon or zeolite;

  • fluidised bed adsorber with activated carbon;

  • rotor adsorber with activated carbon or zeolite;

  • molecular sieve.

Applicability may be restricted where the energy demand is excessive due to the low VOC content.
(d)Plenum technique to reduce waste gas volumeOff-gases from curing ovens/dryers are sent to a large chamber (plenum), and partly recirculated as inlet air in the curing ovens/dryers. The surplus air from the plenum is sent to the off-gas treatment system. This cycle increases the VOC content of the curing ovens/dryers’ air and decreases the waste gas volume.Generally applicable.