Annex XVII RESTRICTIONS ON THE MANUFACTURE, PLACING ON THE MARKET AND USE OF CERTAIN DANGEROUS SUBSTANCES, MIXTURES AND ARTICLESX1F1

Polychlorinated terphenyls (PCTs)

CAS No 75-01-4

EC No 200-831-0

1. (a)

   hazard classes 2.1 to 2.4, 2.6 and 2.7, 2.8 types A and B, 2.9, 2.10, 2.12, 2.13 categories 1 and 2, 2.14 categories 1 and 2, 2.15 types A to F;

2. (b)

   hazard classes 3.1 to 3.6, 3.7 adverse effects on sexual function and fertility or on development, 3.8 effects other than narcotic effects, 3.9 and 3.10;

3. (c)

   hazard class 4.1;

4. (d)

   hazard class 5.1.

• ornamental articles intended to produce light or colour effects by means of different phases, for example in ornamental lamps and ashtrays,

• tricks and jokes,

• games for one or more participants, or any article intended to be used as such, even with ornamental aspects,

Articles not complying with paragraph 1 shall not be placed on the market.

• can be used as fuel in decorative oil lamps for supply to the general public, and,

• present an aspiration hazard and are labelled with R65 or H304,

Decorative oil lamps for supply to the general public shall not be placed on the market unless they conform to the F10British Standard Specification on Decorative oil lamps (BS EN 14059) adopted by the British Standards Institute.

1. (a)

   lamp oils, labelled with R65 or H304, intended for supply to the general public are visibly, legibly and indelibly marked as follows: ‘ Keep lamps filled with this liquid out of the reach of children ’ ; and, by 1 December 2010 , ‘ Just a sip of lamp oil — or even sucking the wick of lamps — may lead to life-threatening lung damage ’ ;

2. (b)

   grill lighter fluids, labelled with R65 or H304, intended for supply to the general public are legibly and indelibly marked by 1 December 2010 as follows: ‘ Just a sip of grill lighter may lead to life threatening lung damage ’ ;

3. (c)

   lamp oils and grill lighters, labelled with R65 or H304, intended for supply to the general public are packaged in black opaque containers not exceeding 1 litre by 1 December 2010 .

Natural or legal persons placing on the market for the first time lamp oils and grill lighter fluids, labelled with R65 or H304, shall by 1 December 2011 , and annually thereafter, provide data on alternatives to lamp oils and grill lighter fluids labelled R65 or H304 to the F13Agency.

CAS No 126-72-7

Shall not be used in textile articles, such as garments, undergarments and linen, intended to come into contact with the skin.

Articles not complying with paragraph 1 shall not be placed on the market.

CAS No 71-43-2

EC No 200-753-7

Shall not be used in toys or parts of toys where the concentration of benzene in the free state is greater than 5 mg/kg (0,0005 %) of the weight of the toy or part of toy.

Toys and parts of toys not complying with paragraph 1 shall not be placed on the market.

• as a substance,

• as a constituent of other substances, or in mixtures, in concentrations equal to, or greater than 0,1 % by weight.

1. (a)

   motor fuels which are covered by F14the Motor Fuel (Composition and Content) Regulations 1999;

2. (b)

   substances and mixtures for use in industrial processes not allowing for the emission of benzene in quantities in excess of those laid down in existing legislation F15;

3. (c)

   F16natural gas placed on the market for use by consumers, provided that the concentration of benzene remains below 0,1 % volume/volume.

1. (a)

   Crocidolite

   CAS No 12001-28-4

2. (b)

   Amosite

   CAS No 12172-73-5

3. (c)

   Anthophyllite

   CAS No 77536-67-5

4. (d)

   Actinolite

   CAS No 77536-66-4

5. (e)

   Tremolite

   CAS No 77536-68-6

6. (f)

   Chrysotile

   CAS No 12001-29-5

   CAS No 132207-32-0

F18...

...

...

F20The competent appropriate authority may, after having consulted the other appropriate authorities, allow placing on the market of articles in their entirety containing asbestos fibres referred to in paragraph 1 which were already installed and/or in service before 1 January 2005, under specific conditions ensuring a high level of protection of human health. F21...

Without prejudice to the application of other F22legislation on the classification, packaging and labelling of substances and mixtures, the placing on the market and use of articles containing these fibres, as permitted according to the preceding derogations, shall be permitted only if suppliers ensure before the placing on the market that articles bear a label in accordance with Appendix 7 to this Annex.

CAS No 545-55-1

EC No 208-892-5

Shall not be used in textile articles, such as garments, undergarments and linen, intended to come into contact with the skin.

Articles not complying with paragraph 1 shall not be placed on the market.

CAS No 59536-65-1

Shall not be used in textile articles, such as garments, undergarments and linen, intended to come into contact with the skin.

Articles not complying with paragraph 1 shall not be placed on the market.

1. (a)

   Soap bark powder

   (Quillaja saponaria) and its derivatives containing saponines

   CAS No 68990-67-0

   EC 273-620-4

2. (b)

   Powder of the roots of Helleborus viridis and Helleborus niger

3. (c)

   Powder of the roots of Veratrum album and Veratrum nigrum

4. (d)

   Benzidine and/or its derivatives

   CAS No 92-87-5

   EC No 202-199-1

5. (e)

   o-Nitrobenzaldehyde

   CAS No 552-89-6

   EC No 209-025-3

6. (f)

   Wood powder

Shall not be used, in jokes and hoaxes or in mixtures or articles intended to be used as such, for instance as a constituent of sneezing powder and stink bombs.

Jokes and hoaxes, or mixtures or articles intended to be used as such, not complying with paragraph 1 shall not be placed on the market.

However, paragraphs 1 and 2 shall not apply to stink bombs containing not more than 1,5 ml of liquid.

1. (a)

   Ammonium sulphide

   CAS No 12135-76-1

   EC No 235-223-4

2. (b)

   Ammonium hydrogen sulphide

   CAS No 12124-99-1

   EC No 235-184-3

3. (c)

   Ammonium polysulphide

   CAS No 9080-17-5

   EC No 232-989-1

Shall not be used, in jokes and hoaxes or in mixtures or articles intended to be used as such, for instance as a constituent of sneezing powder and stink bombs.

Jokes and hoaxes, or mixtures or articles intended to be used as such, not complying with paragraph 1 shall not be placed on the market.

However, paragraphs 1 and 2 shall not apply to stink bombs containing not more than 1,5 ml of liquid.

1. (a)

   Methyl bromoacetate

   CAS No 96-32-2

   EC No 202-499-2

2. (b)

   Ethyl bromoacetate

   CAS No 105-36-2

   EC No 203-290-9

3. (c)

   Propyl bromoacetate

   CAS No 35223-80-4

4. (d)

   Butyl bromoacetate

   CAS No 18991-98-5

   EC No 242-729-9

Shall not be used, in jokes and hoaxes or in mixtures or articles intended to be used as such, for instance as a constituent of sneezing powder and stink bombs.

Jokes and hoaxes, or mixtures or articles intended to be used as such, not complying with paragraph 1 shall not be placed on the market.

However, paragraphs 1 and 2 shall not apply to stink bombs containing not more than 1,5 ml of liquid.

CAS No 91-59-8

EC No 202-080-4 and its salts

CAS No 92-87-5

EC No 202-199-1 and its salts

CAS No 92-93-3

Einecs EC No 202-204-7

CAS No 92-67-1

Einecs EC No 202-177-1 and its salts

1. (a)

   Neutral anhydrous carbonate (PbCO ₃ )

   CAS No 598-63-0

   EC No 209-943-4

2. (b)

   Trilead-bis(carbonate)-dihydroxide 2Pb CO ₃ -Pb(OH) ₂

   CAS No 1319-46-6

   EC No 215-290-6

1. (a)

   PbSO ₄

   CAS No 7446-14-2

   EC No 231-198-9

2. (b)

   Pb _x SO ₄

   CAS No 15739-80-7

   EC No 239-831-0

Mercury compounds

CAS No 7439-97-6

EC No 231-106-7

1. (a)

   in fever thermometers;

2. (b)

   in other measuring devices intended for sale to the general public (such as manometers, barometers, sphygmomanometers, thermometers other than fever thermometers).

The restriction in paragraph 1 shall not apply to measuring devices that were in use in the Community before 3 April 2009. However F30the competent appropriate authority may, after having consulted the other appropriate authorities, restrict or prohibit the placing on the market of such measuring devices.

1. (a)

   measuring devices more than 50 years old on 3 October 2007 ;

2. (b)

   barometers (except barometers within point (a)) until 3 October 2009 .

1. (a)

   barometers;

2. (b)

   hygrometers;

3. (c)

   manometers;

4. (d)

   sphygmomanometers;

5. (e)

   strain gauges to be used with plethysmographs;

6. (f)

   tensiometers;

7. (g)

   thermometers and other non-electrical thermometric applications.

The restriction shall also apply to measuring devices under points (a) to (g) which are placed on the market empty if intended to be filled with mercury.

1. (a)

   sphygmomanometers to be used:

   1. (i)

      in epidemiological studies which are ongoing on 10 October 2012 ;

   2. (ii)

      as reference standards in clinical validation studies of mercury-free sphygmomanometers;

2. (b)

   thermometers exclusively intended to perform tests according to standards that require the use of mercury thermometers until 10 October 2017 ;

3. (c)

   mercury triple point cells which are used for the calibration of platinum resistance thermometers.

1. (a)

   mercury pycnometers;

2. (b)

   mercury metering devices for determination of the softening point.

1. (a)

   measuring devices more than 50 years old on 3 October 2007 ;

2. (b)

   measuring devices which are to be displayed in public exhibitions for cultural and historical purposes.

Arsenic compounds

• the hulls of boats,

• cages, floats, nets and any other appliances or equipment used for fish or shellfish farming,

• any totally or partly submerged appliances or equipment.

Shall not be placed on the market, or used, as substances or in mixtures where the substance or mixture is intended for use in the treatment of industrial waters, irrespective of their use.

Shall not be used in the preservation of wood. Furthermore, wood so treated shall not be placed on the market.

1. (a)

   Relating to the substances and mixtures for the preservation of wood: these may only be used in industrial installations using vacuum or pressure to impregnate wood if they are solutions of inorganic compounds of the copper, chromium, arsenic (CCA) type C and if they are authorised in accordance with F33Articles 19 or 26 of Regulation (EU) No 528/2012. Wood so treated shall not be placed on the market before fixation of the preservative is completed.

2. (b)

   Wood treated with CCA solution in accordance with point (a) may be placed on the market for professional and industrial use provided that the structural integrity of the wood is required for human or livestock safety and skin contact by the general public during its service life is unlikely:

   • as structural timber in public and agricultural buildings, office buildings, and industrial premises,

   • in bridges and bridgework,

   • as constructional timber in freshwater areas and brackish waters, for example jetties and bridges,

   • as noise barriers,

   • in avalanche control,

   • in highway safety fencing and barriers,

   • as debarked round conifer livestock fence posts,

   • in earth retaining structures,

   • as electric power transmission and telecommunications poles,

   • as underground railway sleepers.

3. (c)

   Without prejudice to the application of other F34legislation on the classification, packaging and labelling of substances and mixtures, suppliers shall ensure before the placing on the market that all treated wood placed on the market is individually labelled ‘ For professional and industrial installation and use only, contains arsenic ’. In addition, all wood placed on the market in packs shall also bear a label stating ‘ Wear gloves when handling this wood. Wear a dust mask and eye protection when cutting or otherwise crafting this wood. Waste from this wood shall be treated as hazardous by an authorised undertaking ’.

4. (d)

   Treated wood referred to under point (a) shall not be used:

   • in residential or domestic constructions, whatever the purpose,

   • in any application where there is a risk of repeated skin contact,

   • in marine waters,

   • for agricultural purposes other than for livestock fence posts and structural uses in accordance with point (b),

   • in any application where the treated wood may come into contact with intermediate or finished products intended for human and/or animal consumption.

Wood treated with arsenic compounds that was in use in the Community before 30 September 2007 , or that was placed on the market in accordance with paragraph 4 may remain in place and continue to be used until it reaches the end of its service life.

• may be used or reused subject to the conditions pertaining to its use listed under points 4(b), (c) and (d),

• may be placed on the market subject to the conditions pertaining to its use listed under points 4(b), (c) and (d).

• to be used or reused subject to the conditions pertaining to its use listed under points 4 (b), (c) and (d),

• to be placed on the market subject to the conditions pertaining to its use listed under points 4(b), (c) and (d).

Organostannic compounds

Shall not be placed on the market, or used, as substances or in mixtures where the substance or mixture is acting as biocide in free association paint.

1. (a)

   all craft irrespective of their length intended for use in marine, coastal, estuarine and inland waterways and lakes;

2. (b)

   cages, floats, nets and any other appliances or equipment used for fish or shellfish farming;

3. (c)

   any totally or partly submerged appliance or equipment.

Shall not be placed on the market, or used, as substances or in mixtures where the substance or mixture is intended for use in the treatment of industrial waters.

1. (a)

   Tri-substituted organostannic compounds such as tributyltin (TBT) compounds and triphenyltin (TPT) compounds shall not be used after 1 July 2010 in articles where the concentration in the article, or part thereof, is greater than the equivalent of 0,1 % by weight of tin.

2. (b)

   Articles not complying with point (a) shall not be placed on the market after 1 July 2010 , except for articles that were already in use in the Community before that date.

1. (a)

   Dibutyltin (DBT) compounds shall not be used after 1 January 2012 in mixtures and articles for supply to the general public where the concentration in the mixture or the article, or part thereof, is greater than the equivalent of 0,1 % by weight of tin.

2. (b)

   Articles and mixtures not complying with point (a) shall not be placed on the market after 1 January 2012 , except for articles that were already in use in the Community before that date.

3. (c)

   By way of derogation, points (a) and (b) shall not apply until 1 January 2015 to the following articles and mixtures for supply to the general public:

   • one-component and two-component room temperature vulcanisation sealants (RTV-1 and RTV-2 sealants) and adhesives,

   • paints and coatings containing DBT compounds as catalysts when applied on articles,

   • soft polyvinyl chloride (PVC) profiles whether by themselves or coextruded with hard PVC,

   • fabrics coated with PVC containing DBT compounds as stabilisers when intended for outdoor applications,

   • outdoor rainwater pipes, gutters and fittings, as well as covering material for roofing and façades,

4. (d)

   By way of derogation, points (a) and (b) shall not apply to materials and articles regulated under Regulation (EC) No 1935/2004.

1. (a)

   Dioctyltin (DOT) compounds shall not be used after 1 January 2012 in the following articles for supply to, or use by, the general public, where the concentration in the article, or part thereof, is greater than the equivalent of 0,1 % by weight of tin:

   • textile articles intended to come into contact with the skin,

   • gloves,

   • footwear or part of footwear intended to come into contact with the skin,

   • wall and floor coverings,

   • childcare articles,

   • female hygiene products,

   • nappies,

   • two-component room temperature vulcanisation moulding kits (RTV-2 moulding kits).

2. (b)

   Articles not complying with point (a) shall not be placed on the market after 1 January 2012 , except for articles that were already in use in the Community before that date.

CAS No 75113-37-0

EC No 401-040-5

CAS No 87-86-5

EC No 201-778-6 and its salts and esters

CAS No 7440-43-9

EC No 231-152-8 and its compounds

• polymers or copolymers of vinyl chloride (PVC) [3904 10] [3904 21]

• polyurethane (PUR) [3909 50]

• low-density polyethylene (LDPE), with the exception of low-density polyethylene used for the production of coloured masterbatch [3901 10]

• cellulose acetate (CA) [3912 11]

• cellulose acetate butyrate (CAB) [3912 11]

• epoxy resins [3907 30]

• melamine-formaldehyde (MF) resins [3909 20]

• urea-formaldehyde (UF) resins [3909 10]

• unsaturated polyesters (UP) [3907 91]

• polyethylene terephthalate (PET) [3907 60]

• polybutylene terephthalate (PBT)

• transparent/general-purpose polystyrene [3903 11]

• acrylonitrile methylmethacrylate (AMMA)

• cross-linked polyethylene (VPE)

• high-impact polystyrene

• polypropylene (PP) [3902 10]

Mixtures and articles produced from plastic material as listed above shall not be placed on the market if the concentration of cadmium (expressed as Cd metal) is equal to or greater than 0,01 % by weight of the plastic material.

X3By way of derogation, the second subparagraph shall not apply to articles placed on the market before 10 December 2011 .

F40...

F41...

For paints with codes [ 3208 ] [ 3209 ] with a zinc content exceeding 10 % by weight of the paint, the concentration of cadmium (expressed as Cd metal) shall not be equal to or greater than 0,1 % by weight.

Painted articles shall not be placed on the market if the concentration of cadmium (expressed as Cd metal) is equal to or greater than 0,1 % by weight of the paint on the painted article.

By way of derogation, paragraphs 1 and 2 shall not apply to articles coloured with mixtures containing cadmium for safety reasons.

• mixtures produced from PVC waste, hereinafter referred to as ‘ recovered PVC ’ ,

• mixtures and articles containing recovered PVC if their concentration of cadmium (expressed as Cd metal) does not exceed 0,1 % by weight of the plastic material in the following rigid PVC applications:

  1. (a)

     profiles and rigid sheets for building applications;

  2. (b)

     doors, windows, shutters, walls, blinds, fences, and roof gutters;

  3. (c)

     decks and terraces;

  4. (d)

     cable ducts;

  5. (e)

     pipes for non-drinking water if the recovered PVC is used in the middle layer of a multilayer pipe and is entirely covered with a layer of newly produced PVC in compliance with paragraph 1 above.

Suppliers shall ensure, before the placing on the market of mixtures and articles containing recovered PVC for the first time, that these are visibly, legibly and indelibly marked as follows: ‘ Contains recovered PVC ’ or with the following pictogram:

F43...

Shall not be used for cadmium plating metallic articles or components of the articles used in the following sectors/applications:

1. (a)

   equipment and machinery for:

   • food production [8210] [8417 20] [8419 81] [8421 11] [8421 22] [8422] [8435] [8437] [8438] [8476 11]

   • agriculture [8419 31] [8424 81] [8432] [8433] [8434] [8436]

   • cooling and freezing [8418]

   • printing and book-binding [8440] [8442] [8443]

2. (b)

   equipment and machinery for the production of:

   • household goods [7321] [8421 12] [8450] [8509] [8516]

   • furniture [8465] [8466] [9401] [9402] [9403] [9404]

   • sanitary ware [7324]

   • central heating and air conditioning plant [7322] [8403] [8404] [8415]

In any case, whatever their use or intended final purpose, the placing on the market of cadmium-plated articles or components of such articles used in the sectors/applications listed in points (a) and (b) above and of articles manufactured in the sectors listed in point (b) above is prohibited.

1. (a)

   equipment and machinery for the production of:

   • paper and board [8419 32] [8439] [8441] textiles and clothing [8444] [8445] [8447] [8448] [8449] [8451] [8452]

2. (b)

   equipment and machinery for the production of:

   • industrial handling equipment and machinery [8425] [8426] [8427] [8428] [8429] [8430] [8431]

   • road and agricultural vehicles [chapter 87]

   • rolling stock [chapter 86]

   • vessels [chapter 89]

• articles and components of the articles used in the aeronautical, aerospace, mining, offshore and nuclear sectors whose applications require high safety standards and in safety devices in road and agricultural vehicles, rolling stock and vessels,

• electrical contacts in any sector of use, where that is necessary to ensure the reliability required of the apparatus on which they are installed.

Brazing fillers shall not be placed on the market if the concentration of cadmium (expressed as Cd metal) is equal to or greater than 0,01 % by weight.

For the purpose of this paragraph brazing shall mean a joining technique using alloys and undertaken at temperatures above 450 °C.

By way of derogation, paragraph 8 shall not apply to brazing fillers used in defence and aerospace applications and to brazing fillers used for safety reasons.

1. (i)

   metal beads and other metal components for jewellery making;

2. (ii)

   metal parts of jewellery and imitation jewellery articles and hair accessories, including:

   • bracelets, necklaces and rings,

   • piercing jewellery,

   • wrist-watches and wrist-wear,

   • brooches and cufflinks.

By way of derogation, paragraph 10 shall not apply to articles placed on the market before 10 December 2011 and jewellery more than 50 years old on 10 December 2011 .

Trade name: Ugilec 141

CAS No 76253-60-6

Articles containing the substance shall not be placed on the market.

1. (a)

   in the case of plant and machinery already in service on 18 June 1994 , until such plant and machinery is disposed of;

2. (b)

   in the case of the maintenance of plant and machinery already in service within a Member State on 18 June 1994 .

For the purposes of point (a) F45the competent appropriate authority may, after having consulted the other appropriate authorities, on grounds of human health protection and environmental protection, prohibit within their territory the use of such plant or machinery before it is disposed of.

Trade name: Ugilec 121

Ugilec 21

Trade name: DBBT

CAS No 99688-47-8

CAS No 7440-02-0

EC No 231-111-4 and its compounds

1. (a)

   in any post assemblies which are inserted into pierced ears and other pierced parts of the human body unless the rate of nickel release from such post assemblies is less than 0,2 μg/cm ² /week (migration limit);

2. (b)

   in articles intended to come into direct and prolonged contact with the skin such as:

   • earrings,

   • necklaces, bracelets and chains, anklets, finger rings,

   • wrist-watch cases, watch straps and tighteners,

   • rivet buttons, tighteners, rivets, zippers and metal marks, when these are used in garments,

   if the rate of nickel release from the parts of these articles coming into direct and prolonged contact with the skin is greater than 0,5 μg/cm ² /week.

3. (c)

   in articles referred to in point (b) where these have a non-nickel coating unless such coating is sufficient to ensure that the rate of nickel release from those parts of such articles coming into direct and prolonged contact with the skin will not exceed 0,5 μg/cm ² /week for a period of at least two years of normal use of the article.

Articles which are the subject of paragraph 1 shall not be placed on the market unless they conform to the requirements set out in that paragraph.

The standards adopted by the European Committee for Standardisation (CEN) shall be used as the test methods for demonstrating the conformity of articles to paragraphs 1 and 2.

Substances which are classified as carcinogen category 1A or 1B in F47the GB mandatory classification and labelling list and are listed in Appendix 1 or Appendix 2, respectively.

Substances which are classified as germ cell mutagen category 1A or 1B in the GB mandatory classification and labelling list and are listed in Appendix 3 or Appendix 4, respectively.

Substances which are classified as reproductive toxicant category 1A or 1B in the GB mandatory classification and labelling list and are listed in Appendix 5 or Appendix 6, respectively.

1. (a)

   Creosote; wash oil

   CAS No 8001-58-9

   EC No 232-287-5

2. (b)

   Creosote oil; wash oil

   CAS No 61789-28-4

   EC No 263-047-8

3. (c)

   Distillates (coal tar), naphthalene oils; naphthalene oil

   CAS No 84650-04-4

   EC No 283-484-8

4. (d)

   Creosote oil, acenaphthene fraction; wash oil

   CAS No 90640-84-9

   EC No 283-484-8EC No 292-605-3

5. (e)

   Distillates (coal tar), upper; heavy anthracene oil

   CAS No 65996-91-0

   EC No 266-026-1

6. (f)

   Anthracene oil

   CAS No 90640-80-5

   EC No 292-602-7

7. (g)

   Tar acids, coal, crude; crude phenols

   CAS No 65996-85-2

   EC No 266-019-3

8. (h)

   Creosote, wood

   CAS No 8021-39-4

   EC No 232-419-1

9. (i)

   Low temperature tar oil, alkaline; extract residues (coal), low temperature coal tar alkaline

   CAS No 122384-78-5

   EC No 310-191-5

Shall not be placed on the market, or used, as substances or in mixtures where the substance or mixture is intended for the treatment of wood. Furthermore, wood so treated shall not be placed on the market.

1. (a)

   The substances and mixtures may be used for wood treatment in industrial installations or by professionals covered by F53... legislation on the protection of workers for in situ retreatment only if they contain:

   1. (i)

      benzo[a]pyrene at a concentration of less than 50 mg/kg (0,005 % by weight), and

   2. (ii)

      water extractable phenols at a concentration of less than 3 % by weight.

   Such substances and mixtures for use in wood treatment in industrial installations or by professionals:

   • may be placed on the market only in packaging of a capacity equal to or greater than 20 litres,

   • shall not be sold to consumers.

   Without prejudice to the application of other F54legislation on the classification, packaging and labelling of substances and mixtures, suppliers shall ensure before the placing on the market that the packaging of such substances and mixtures is visibly, legibly and indelibly marked as follows:

   ‘ For use in industrial installations or professional treatment only ’ .

2. (b)

   Wood treated in industrial installations or by professionals according to subparagraph (a) which is placed on the market for the first time or retreated in situ may be used for professional and industrial use only, for example on railways, in electric power transmission and telecommunications, for fencing, for agricultural purposes (for example stakes for tree support) and in harbours and waterways.

3. (c)

   The prohibition in paragraph 1 on the placing on the market shall not apply to wood which has been treated with substances listed in entry 31 (a) to (i) before 31 December 2002 and is placed on the second-hand market for re-use.

• inside buildings, whatever their purpose,

• in toys,

• in playgrounds,

• in parks, gardens, and outdoor recreational and leisure facilities where there is a risk of frequent skin contact,

• in the manufacture of garden furniture such as picnic tables,

• for the manufacture and use and any re-treatment of:

  • containers intended for growing purposes,

  • packaging that may come into contact with raw materials, intermediate or finished products destined for human and/or animal consumption,

  • other materials which may contaminate the articles mentioned above.

CAS No 67-66-3

EC No 200-663-8

CAS No 79-00-5

EC No 201-166-9

CAS No 79-34-5

EC No 201-197-8

CAS No 630-20-6

CAS No 76-01-7

EC No 200-925-1

CAS No 75-35-4

EC No 200-864-0

• as substances,

• as constituents of other substances, or in mixtures in concentrations equal to or greater than 0,1 % by weight,

where the substance or mixture is intended for supply to the general public and/or is intended for diffusive applications such as in surface cleaning and cleaning of fabrics.

‘ For use in industrial installations only ’ .

By way of derogation this provision shall not apply to:

1. (a)

   F56medicinal or veterinary medicinal products as defined by the Veterinary Medicines Regulations 2013 and the Human Medicines Regulations 2012;

2. (b)

   cosmetic products as defined by F57Regulation 1223/2009.

Substances classified as flammable gases category 1 or 2, flammable liquids categories 1, 2 or 3, flammable solids category 1 or 2, substances and mixtures which, in contact with water, emit flammable gases, category 1, 2 or 3, pyrophoric liquids category 1 or pyrophoric solids category 1, regardless of whether they appear in F58the GB mandatory classification and labelling list or not.

• metallic glitter intended mainly for decoration,

• artificial snow and frost,

• ‘ whoopee ’ cushions,

• silly string aerosols,

• imitation excrement,

• horns for parties,

• decorative flakes and foams,

• artificial cobwebs,

• stink bombs.

‘ For professional users only ’ .

By way of derogation, paragraphs 1 and 2 shall not apply to the aerosol dispensers referred to Article 8 (1a) of Council Directive 75/324/EEC ^f2.

The aerosol dispensers referred to in paragraphs 1 and 2 shall not be placed on the market unless they conform to the requirements indicated.

CAS No 67-72-1

EC No 200-666-4

Azocolourants and Azodyes

• clothing, bedding, towels, hairpieces, wigs, hats, nappies and other sanitary items, sleeping bags,

• footwear, gloves, wristwatch straps, handbags, purses/wallets, briefcases, chair covers, purses worn round the neck,

• textile or leather toys and toys which include textile or leather garments,

• yarn and fabrics intended for use by the final consumer.

Furthermore, the textile and leather articles referred to in paragraph 1 shall not be placed on the market unless they conform to the requirements set out in that paragraph.

Azodyes, which are contained in Appendix 9, ‘ List of azodyes ’ shall not be placed on the market, or used, as substances, or in mixtures in concentrations greater than 0,1 % by weight, where the substance or the mixture is intended for colouring textile and leather articles.

C ₁₂ H ₂ Br ₈ O

• as a substance,

• as a constituent of other substances, or in mixtures, in concentrations greater than 0,1 % by weight.

Articles shall not be placed on the market if they, or flame-retardant parts thereof, contain this substance in concentrations greater than 0,1 % by weight.

• to articles that were in use in the Community before 15 August 2004,

• to electrical and electronic equipment within the scope of F62the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.

1. (a)

   Nonylphenol

   C ₆ H4(OH)C ₉ H ₁₉

   CAS 25154-52-3

   EC 246-672-0

2. (b)

   Nonylphenol ethoxylates

   (C ₂ H ₄ O) _n C ₁₅ H ₂₄ O

(C ₂ H ₄ O) _n C ₁₅ H ₂₄ O

Shall not be placed on the market after 3 February 2021 in textile articles which can reasonably be expected to be washed in water during their normal lifecycle, in concentrations equal to or greater than 0,01 % by weight of that textile article or of each part of the textile article.

Paragraph 1 shall not apply to the placing on the market of second-hand textile articles or of new textile articles produced, without the use of NPE, exclusively from recycled textiles.

For the purposes of paragraphs 1 and 2, ‘ textile article ’ means any unfinished, semi-finished or finished product which is composed of at least 80 % textile fibres by weight, or any other product that contains a part which is composed of at least 80 % textile fibres by weight, including products such as clothing, accessories, interior textiles, fibres, yarn, fabrics and knitted panels.

Chromium VI compounds

Cement and cement-containing mixtures shall not be placed on the market, or used, if they contain, when hydrated, more than 2 mg/kg (0,0002 %) soluble chromium VI of the total dry weight of the cement.

If reducing agents are used, then without prejudice to the application of other F64legislation on the classification, packaging and labelling of substances and mixtures, suppliers shall ensure before the placing on the market that the packaging of cement or cement-containing mixtures is visibly, legibly and indelibly marked with information on the packing date, as well as on the storage conditions and the storage period appropriate to maintaining the activity of the reducing agent and to keeping the content of soluble chromium VI below the limit indicated in paragraph 1.

By way of derogation, paragraphs 1 and 2 shall not apply to the placing on the market for, and use in, controlled closed and totally automated processes in which cement and cement-containing mixtures are handled solely by machines and in which there is no possibility of contact with the skin.

The standard adopted by the European Committee for Standardization (CEN) for testing the water-soluble chromium (VI) content of cement and cement-containing mixtures shall be used as the test method for demonstrating conformity with paragraph 1.

Leather articles coming into contact with the skin shall not be placed on the market where they contain chromium VI in concentrations equal to or greater than 3 mg/kg (0,0003 % by weight) of the total dry weight of the leather.

Articles containing leather parts coming into contact with the skin shall not be placed on the market where any of those leather parts contains chromium VI in concentrations equal to or greater than 3 mg/kg (0,0003 % by weight) of the total dry weight of that leather part.

Paragraphs 5 and 6 shall not apply to the placing on the market of second-hand articles which were in end-use in the Union before 1 May 2015 .

CAS No 108-88-3

EC No 203-625-9

CAS No 120-82-1

EC No 204-428-0

1. (a)

   Benzo[a]pyrene (BaP)

   CAS No 50-32-8

2. (b)

   Benzo[e]pyrene (BeP)

   CAS No 192-97-2

3. (c)

   Benzo[a]anthracene (BaA)

   CAS No 56-55-3

4. (d)

   Chrysen (CHR)

   CAS No 218-01-9

5. (e)

   Benzo[b]fluoranthene (BbFA)

   CAS No 205-99-2

6. (f)

   Benzo[j]fluoranthene (BjFA)

   CAS No 205-82-3

7. (g)

   Benzo[k]fluoranthene (BkFA)

   CAS No 207-08-9

8. (h)

   Dibenzo[a,h]anthracene (DBAhA)

   CAS No 53-70-3

• more than 1 mg/kg (0,0001 % by weight) BaP, or,

• more than 10 mg/kg (0,001 % by weight) of the sum of all listed PAHs.

F67The standard F68BS EN 16143:2013 (Petroleum products — Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils — Procedure using double LC cleaning and GC/MS analysis) shall be used as the test method for demonstrating conformity with the limits referred to in the first subparagraph.

Until 23 September 2016 , the limits referred to in the first subparagraph may be regarded as kept, if the polycyclic aromatics (PCA) extract is less than 3 % by weight as measured by the Institute of Petroleum standard IP 346:1998 (Determination of PCA in unused lubricating base oils and asphaltene free petroleum fractions — Dimethyl sulphoxide extraction refractive index method), provided that compliance with the limits of BaP and of the listed PAHs, as well as the correlation of the measured values with the PCA extract, is measured by the manufacturer or importer every six months or after each major operational change, whichever is earlier.

These limits shall be regarded as kept, if the vulcanised rubber compounds do not exceed the limit of 0,35 % Bay protons as measured and calculated by ISO 21461 (Rubber vulcanised — Determination of aromaticity of oil in vulcanised rubber compounds).

By way of derogation, paragraph 2 shall not apply to retreaded tyres if their tread does not contain extender oils exceeding the limits referred to in paragraph 1.

• — Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles;

• — Regulation (EU) No 167/2013 of the European Parliament and of the Council on the approval and market surveillance of agricultural and forestry vehicles;

• — Regulation (EU) No 168/2013 of the European Parliament and of the Council on the approval and market surveillance of two- or three-wheel vehicles and quadricycles.

Such articles include amongst others:

• sport equipment such as bicycles, golf clubs, racquets

• household utensils, trolleys, walking frames

• tools for domestic use

• clothing, footwear, gloves and sportswear

• watch-straps, wrist-bands, masks, head-bands

Toys, including activity toys, and childcare articles, shall not be placed on the market, if any of their rubber or plastic components that come into direct as well as prolonged or short-term repetitive contact with the human skin or the oral cavity, under normal or reasonably foreseeable conditions of use, contain more than 0,5 mg/kg (0,00005 % by weight of this component) of any of the listed PAHs.

By way of derogation from paragraphs 5 and 6, these paragraphs shall not apply to articles placed on the market for the first time before 27 December 2015 .

By 27 December 2017 , the Commission shall review the limit values in paragraphs 5 and 6 in the light of new scientific information, including migration of PAHs from the articles referred to therein, and information on alternative raw materials and, if appropriate, modify these paragraphs accordingly.

F7151.

Bis(2-ethylhexyl) phthalate (DEHP)

CAS No.: 117-81-7

EC No.: 204-211-0

Dibutyl phthalate (DBP)

CAS No.: 84-74-2

EC No.: 201-557-4

Benzyl butyl phthalate (BBP)

CAS No.: 85-68-7

EC No.: 201-622-7

Diisobutyl phthalate (DIBP)

CAS No.: 84-69-5

EC No.: 201-553-2

Shall not be used as substances or in mixtures, individually or in any combination of the phthalates listed in column 1 of this entry, in a concentration equal to or greater than 0,1 % by weight of the plasticised material, in toys and childcare articles.

In addition, DIBP shall not be placed on the market after 7 July 2020 in toys or childcare articles, individually or in any combination with the first three phthalates listed in column 1 of this entry, in a concentration equal to or greater than 0,1 % by weight of the plasticised material.

Shall not be placed on the market after 7 July 2020 in articles, individually or in any combination of the phthalates listed in column 1 of this entry, in a concentration equal to or greater than 0,1 % by weight of the plasticised material in the article.

1. (a)

   articles exclusively for industrial or agricultural use, or for use exclusively in the open air, provided that no plasticised material comes into contact with human mucous membranes or into prolonged contact with human skin;

2. (b)

   aircraft, placed on the market before 7 January 2024 , or articles, whenever placed on the market, for use exclusively in the maintenance or repair of those aircraft, where those articles are essential for the safety and airworthiness of the aircraft;

3. (c)

   motor vehicles within the scope of F72Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles, placed on the market before 7 January 2024, or articles, whenever placed on the market, for use exclusively in the maintenance or repair of those vehicles, where the vehicles cannot function as intended without those articles;

4. (d)

   articles placed on the market before 7 July 2020;

5. (e)

   measuring devices for laboratory use, or parts thereof;

6. (f)

   materials and articles intended to come into contact with food within the scope of Regulation (EC) No 1935/2004 or Commission Regulation (EU) No 10/2011 ^f3;

7. (g)

   F73relevant medical devices F74..., or parts thereof;

8. (h)

   electrical and electronic equipment within the scope of F75the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012;

9. (i)

   the immediate packaging of medicinal products within the scope of F76the Veterinary Medicines Regulations 2013 or the Human Medicines Regulations 2012;

10. (j)

    toys and childcare articles covered by paragraphs 1 or 2.

1. (a)

   ‘ plasticised material ’ means any of the following homogeneous materials:

   • polyvinyl chloride (PVC), polyvinylidene chloride (PVDC),polyvinyl acetate (PVA), polyurethanes,

   • any other polymer (including, inter alia, polymer foams and rubber material) except silicone rubber and natural latex coatings,

   • surface coatings, non-slip coatings, finishes, decals, printed designs,

   • adhesives, sealants, paints and inks.

2. (b)

   ‘ prolonged contact with human skin ’ means continuous contact of more than 10 minutes duration or intermittent contact over a period of 30 minutes, per day.

3. (c)

   ‘ childcare article ’ shall mean any product intended to facilitate sleep, relaxation, hygiene, the feeding of children or sucking on the part of children.

1. (a)

   a civil aircraft produced in accordance with a type certificate issued under F77Regulation (EU) 2018/1139 or with a design approval issued under the national regulations of a contracting State of the International Civil Aviation Organisation (ICAO), or for which a certificate of airworthiness has been issued by an ICAO contracting State under Annex 8 to the Convention on International Civil Aviation, signed on December 7, 1944 , in Chicago;

2. (b)

   a military aircraft.

1. (a)

   Di- ‘ isononyl ’ phthalate (DINP)

   CAS No 28553-12-0 and 68515-48-0

   EC No 249-079-5 and 271-090-9

2. (b)

   Di- ‘ isodecyl ’ phthalate (DIDP)

   CAS No 26761-40-0 and 68515-49-1

   EC No 247-977-1 and 271-091-4

3. (c)

   Di-n-octyl phthalate (DNOP)

   CAS No 117-84-0

   EC No 204-214-7

Shall not be used as substances or in mixtures, in concentrations greater than 0,1 % by weight of the plasticised material, in toys and childcare articles which can be placed in the mouth by children.

Such toys and childcare articles containing these phthalates in a concentration greater than 0,1 % by weight of the plasticised material shall not be placed on the market.

For the purpose of this entry ‘ childcare article ’ shall mean any product intended to facilitate sleep, relaxation, hygiene, the feeding of children or sucking on the part of children.

CAS No 111-77-3

EC No 203-906-6

CAS No 112-34-5

EC No 203-961-6

Shall not be placed on the market for the first time after 27 June 2010 , for supply to the general public, as a constituent of spray paints or spray cleaners in aerosol dispensers in concentrations equal to or greater than 3 % by weight.

Spray paints and spray cleaners in aerosol dispensers containing DEGBE and not conforming to paragraph 1 shall not be placed on the market for supply to the general public after 27 December 2010.

‘ Do not use in paint spraying equipment ’ .

CAS No 26447-40-5

EC No 247-714-0

including the following specific isomers:

1. (a)

   4,4’-Methylenediphenyl diisocyanate:

   CAS No 101-68-8

   EC No 202-966-0;

2. (b)

   2,4’-Methylenediphenyl diisocyanate:

   CAS No 5873-54-1

   EC No 227-534-9;

3. (c)

   2,2’-Methylenediphenyl diisocyanate:

   CAS No 2536-05-2

   EC No 219-799-4

1. (a)

   contains protective gloves which comply with the requirements of F80Regulation (EU) 2016/425;

2. (b)

   is marked visibly, legibly and indelibly as follows, and without prejudice to other F81... legislation concerning the classification, packaging and labelling of substances and mixtures:

   • ‘ Persons already sensitised to diisocyanates may develop allergic reactions when using this product.

   • Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product.

   • This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard F82BS EN 14387) is used. ’

By way of derogation, paragraph 1(a) shall not apply to hot melt adhesives.

CAS No 110-82-7

EC No 203-806-2

Shall not be placed on the market for the first time after 27 June 2010 , for supply to the general public, as a constituent of neoprene-based contact adhesives in concentrations equal to or greater than 0,1 % by weight in package sizes greater than 350 g.

Neoprene-based contact adhesives containing cyclohexane and not conforming to paragraph 1 shall not be placed on the market for supply to the general public after 27 December 2010.

• ‘ This product is not to be used under conditions of poor ventilation.

• This product is not to be used for carpet laying. ’ .

CAS No 6484-52-2

EC No 229-347-8

Shall not be placed on the market for the first time after 27 June 2010 as a substance, or in mixtures that contain more than 28 % by weight of nitrogen in relation to ammonium nitrate, for use as a solid fertiliser, straight or compound, unless the fertiliser complies with the technical provisions for ammonium nitrate fertilisers of high nitrogen content set out in Annex III to Regulation (EC) No 2003/2003 of the European Parliament and of the Council ^f4.

1. (a)

   downstream users and distributors, including natural or legal persons licensed or authorised in accordance with F84the F85assimilated law that transposed Directive 2014/28/EU;

2. (b)

   farmers for use in agricultural activities, either full time or part time and not necessarily related to the size of the land area.

   For the purposes of this subparagraph:

   1. (i)

      ‘ farmer ’ shall mean a natural or legal person, or a group of natural or legal persons, whatever legal status is granted to the group and its members F86..., whose holding is situated within F87Great Britain, and who exercises an agricultural activity;

   2. (ii)

      ‘agricultural activity’ shall mean the production, rearing or growing of agricultural products including harvesting, milking, breeding animals and keeping animals for farming purposes, or maintaining the land in good agricultural and environmental condition F88...;

3. (c)

   natural or legal persons engaged in professional activities such as horticulture, plant growing in greenhouses, maintenance of parks, gardens or sport pitches, forestry or other similar activities.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CAS No 75-09-2

EC No: 200-838-9

1. (a)

   placed on the market for the first time for supply to the general public or to professionals after 6 December 2010;

2. (b)

   placed on the market for supply to the general public or to professionals after 6 December 2011;

3. (c)

   used by professionals after 6 June 2012.

   For the purposes of this entry:

   1. (i)

      ‘ professional ’ means any natural or legal person, including workers and self-employed workers undertaking paint stripping in the course of their professional activity outside an industrial installation;

   2. (ii)

      ‘ industrial installation ’ means a facility used for paint stripping activities.

F92A derogation shall define appropriate provisions for the protection of the health and safety of those professionals using paint strippers containing dichloromethane F93....

Those provisions shall include a requirement that a professional shall hold a certificate F94..., or provide other documentary evidence to that effect, F95..., so as to demonstrate proper training and competence to safely use paint strippers containing dichloromethane.

F96...

1. (a)

   awareness, evaluation and management of risks to health, including information on existing substitutes or processes, which under their conditions of use are less hazardous to the health and safety of workers;

2. (b)

   use of adequate ventilation;

3. (c)

   use of appropriate personal protective equipment that complies with F98Regulation (EU) 2016/425.

Employers and self-employed workers shall preferably replace dichloromethane with a chemical agent or process which, under its conditions of use, presents no risk, or a lower risk, to the health and safety of workers.

Professional shall apply all relevant safety measures in practice, including the use of personal protective equipment.

1. (a)

   effective ventilation in all processing areas, in particular for the wet processing and the drying of stripped articles: local exhaust ventilation at strip tanks supplemented by forced ventilation in those areas, so as to minimise exposure and to ensure compliance, where technically feasible, with relevant occupational exposure limits;

2. (b)

   measures to minimise evaporation from strip tanks comprising: lids for covering strip tanks except during loading and unloading; suitable loading and unloading arrangements for strip tanks; and wash tanks with water or brine to remove excess solvent after unloading;

3. (c)

   measures for the safe handling of dichloromethane in strip tanks comprising: pumps and pipework for transferring paint stripper to and from strip tanks; and suitable arrangements for safe cleaning of tanks and removal of sludge;

4. (d)

   personal protective equipment that complies with F100Regulation (EU) 2016/425 comprising: suitable protective gloves, safety goggles and protective clothing; and appropriate respiratory protective equipment where compliance with relevant occupational exposure limits cannot be otherwise achieved;

5. (e)

   adequate information, instruction and training for operators in the use of such equipment.

‘ Restricted to industrial use and to F102approved professionals F103... — verify where use is allowed. ’

CAS No 79-06-1

• CAS No 624-49-7

• EC 210-849-0

1. (a)

   Phenylmercury acetate

   • EC No: 200-532-5

   • CAS No: 62-38-4

2. (b)

   Phenylmercury propionate

   • EC No: 203-094-3

   • CAS No: 103-27-5

3. (c)

   Phenylmercury 2-ethylhexanoate

   • EC No: 236-326-7

   • CAS No: 13302-00-6

4. (d)

   Phenylmercury octanoate

   • EC No: -

   • CAS No: 13864-38-5

5. (e)

   Phenylmercury neodecanoate

   • EC No: 247-783-7

   • CAS No: 26545-49-3

Shall not be manufactured, placed on the market or used as substances or in mixtures after 10 October 2017 if the concentration of mercury in the mixtures is equal to or greater than 0,01 % by weight.

Articles or any parts thereof containing one or more of these substances shall not be placed on the market after 10 October 2017 if the concentration of mercury in the articles or any part thereof is equal to or greater than 0,01 % by weight.

• CAS No 7439-92-1

• EC No 231-100-4

and its compounds

Shall not be placed on the market or used in any individual part of jewellery articles if the concentration of lead (expressed as metal) in such a part is equal to or greater than 0,05 % by weight.

1. (i)

   ‘ jewellery articles ’ shall include jewellery and imitation jewellery articles and hair accessories, including:

   1. (a)

      bracelets, necklaces and rings;

   2. (b)

      piercing jewellery;

   3. (c)

      wrist watches and wrist-wear;

   4. (d)

      brooches and cufflinks;

2. (ii)

   ‘ any individual part ’ shall include the materials from which the jewellery is made, as well as the individual components of the jewellery articles.

Paragraph 1 shall also apply to individual parts when placed on the market or used for jewellery-making.

1. (a)

   crystal glass as defined in F107the Crystal Glass (Descriptions) Regulations 1973;

2. (b)

   internal components of watch timepieces inaccessible to consumers;

3. (c)

   non-synthetic or reconstructed precious and semiprecious stones (CN code 7103 , as established by Regulation (EEC) No 2658/87 F108as it has effect in EU law immediately before IP completion day), unless they have been treated with lead or its compounds or mixtures containing these substances;

4. (d)

   enamels, defined as vitrifiable mixtures resulting from the fusion, vitrification or sintering of minerals melted at a temperature of at least 500 °C.

By way of derogation, paragraph 1 shall not apply to jewellery articles placed on the market for the first time before 9 October 2013 and jewellery articles produced before 10 December 1961.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

That limit shall not apply where it can be demonstrated that the rate of lead release from such an article or any such accessible part of an article, whether coated or uncoated, does not exceed 0,05 μg/cm ² per hour (equivalent to 0,05 μg/g/h), and, for coated articles, that the coating is sufficient to ensure that this release rate is not exceeded for a period of at least two years of normal or reasonably foreseeable conditions of use of the article.

For the purposes of this paragraph, it is considered that an article or accessible part of an article may be placed in the mouth by children if it is smaller than 5 cm in one dimension or has a detachable or protruding part of that size.

1. (a)

   jewellery articles covered by paragraph 1;

2. (b)

   crystal glass as defined in F110the Crystal Glass (Descriptions) Regulations 1973;

3. (c)

   non-synthetic or reconstructed precious and semi-precious stones (CN code 7103 as established by Regulation (EEC) No 2658/87 F111as it has effect in EU law immediately before IP completion day) unless they have been treated with lead or its compounds or mixtures containing these substances;

4. (d)

   enamels, defined as vitrifiable mixtures resulting from the fusion, vitrification or sintering of mineral melted at a temperature of at least 500 °C;

5. (e)

   keys and locks, including padlocks;

6. (f)

   musical instruments;

7. (g)

   articles and parts of articles comprising brass alloys, if the concentration of lead (expressed as metal) in the brass alloy does not exceed 0,5 % by weight;

8. (h)

   the tips of writing instruments;

9. (i)

   religious articles;

10. (j)

    portable zinc-carbon batteries and button cell batteries;

11. (k)

    articles within the scope of:

    1. (i)

       F112the F113assimilated law that transposed Directive 94/62/EC;

    2. (ii)

       Regulation (EC) No 1935/2004;

    3. (iii)

       F114the Toys (Safety) Regulations 2011;

    4. (iv)

       F115the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.

By 1 July 2019 , the F116Agency shall re-evaluate paragraphs 7 and 8(e), (f), (i) and (j) of this entry in the light of new scientific information, including the availability of alternatives and the migration of lead from the articles referred to in paragraph 7, including the requirement on coating integrity, and, if appropriate, F117make recommendations to the Secretary of State.

By way of derogation paragraph 7 shall not apply to articles placed on the market for the first time before 1 June 2016 .

F118Must not be used at an outdoor shooting range after 1 April 2028 in a concentration equal to or greater than 3% by weight in projectiles other than shot (“other projectiles”).

In cases other than those falling within paragraph 11, must not be used or placed on the market after 1 April 2029—

1. (a)

   in a concentration equal to or greater than 1% by weight in shot;

2. (b)

   in a concentration equal to or greater than 3% by weight in other projectiles.

Paragraph 11 does not apply to other projectiles used at an outdoor shooting range where—

1. (a)

   action has been taken at the outdoor shooting range to reduce the risks so far as is reasonably practicable to ruminants and grazing wildlife, soil and water arising from this use;

2. (b)

   documentation is maintained at the outdoor shooting range regarding the action in subparagraph (a), making this available to the relevant enforcing authority upon request;

3. (c)

   a submission has been made to the relevant enforcing authority in respect of the outdoor shooting range at least once in the previous three years setting out the following information—

   1. (i)

      the name, address, and Ordnance Survey grid reference of the outdoor shooting range;

   2. (ii)

      the name and contact details of the person responsible for safety at the outdoor shooting range; and

   3. (iii)

      a declaration confirming that action has been taken in accordance with subparagraph (a); and

4. (d)

   upon any change to information submitted under subparagraph (c), a further submission has been made to the relevant enforcing authority on behalf of the outdoor shooting range with the updated information.

CAS No 106-46-7

EC No 203-400-5

Inorganic ammonium salts

CAS No 80-05-7

EC No 201-245-8

(decabromodiphenyl ether; decaBDE)

CAS No 1163-19-5

EC No 214-604-9

CAS No 67-56-1

EC No 200-659-6

CAS No 556-67-2

EC No 209-136-7

Decamethylcyclopentasiloxane (D5)

CAS No 541-02-6

EC No 208-764-9

Shall not be placed on the market in wash-off cosmetic products in a concentration equal to or greater than 0,1 % by weight of either substance, after 31 January 2020 .

For the purposes of this entry, ‘ wash-off cosmetic products ’ means cosmetic products as defined in Article 2(1)(a) of Regulation (EC) No 1223/2009 that, under normal conditions of use, are washed off with water after application.

(NMP)

CAS No 872-50-4

EC No 212-828-1

Shall not be placed on the market as a substance on its own or in mixtures in a concentration equal to or greater than 0,3 % after 9 May 2020 unless manufacturers, importers and downstream users have included in the relevant chemical safety reports and safety data sheets, Derived No-Effect Levels (DNELs) relating to exposure of workers of 14,4 mg/m ³ for exposure by inhalation and 4,8 mg/kg/day for dermal exposure.

Shall not be manufactured, or used, as a substance on its own or in mixtures in a concentration equal to or greater than 0,3 % after 9 May 2020 unless manufacturers and downstream users take the appropriate risk management measures and provide the appropriate operational conditions to ensure that exposure of workers is below the DNELs specified in paragraph 1.

By way of derogation from paragraphs 1 and 2, the obligations laid down therein shall apply from 9 May 2024 in relation to placing on the market for use, or use, as a solvent or reactant in the process of coating wires.

The substances listed in column 1 of the Table in Appendix 12

1. (a)

   clothing or related accessories;

2. (b)

   textiles other than clothing which, under normal or reasonably foreseeable conditions of use, come into contact with human skin to an extent similar to clothing;

3. (c)

   footwear;

if the clothing, related accessory, textile other than clothing or footwear is for use by consumers and the substance is present in a concentration, measured in homogeneous material, equal to or greater than that specified for that substance in Appendix 12.

By way of derogation, in relation to the placing on the market of formaldehyde [CAS No 50-00-0] in jackets, coats or upholstery, the relevant concentration for the purposes of paragraph 1 shall be 300 mg/kg during the period between 1 November 2020 and 1 November 2023 . The concentration specified in Appendix 12 shall apply thereafter.

1. (a)

   clothing, related accessories or footwear, or parts of clothing, related accessories or footwear, made exclusively of natural leather, fur or hide;

2. (b)

   non-textile fasteners and non-textile decorative attachments;

3. (c)

   second-hand clothing, related accessories, textiles other than clothing or footwear

4. (d)

   wall-to-wall carpets and textile floor coverings for indoor use, rugs and runners.

Paragraph 1 shall not apply to clothing, related accessories, textiles other than clothing, or footwear within the scope of Regulation (EU) 2016/425 of the European Parliament and of the Council (*) F133, Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017 on medical devices as it has effect in EU law or F134The Medical Devices Regulations 2002.

Paragraph 1(b) shall not apply to disposable textiles. ‘ Disposable textiles ’ means textiles that are designed to be used only once or for a limited time and are not intended for subsequent use for the same or a similar purpose.

Paragraphs 1 and 2 shall apply without prejudice to the application of any stricter restrictions set out in this Annex or in other applicable F135... legislation.

The F136Secretary of State shall review the exemption in paragraph 3(d) F137....

Regulation (EU) 2016/425 of the European Parliament and of the Council of of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC ( OJ L 81, 31.3.2016, p. 51 ).

Any of its mono-, di- or tri-O-(alkyl) derivatives (TDFAs)

Diisocyanates, O = C=N-R-N = C=O, with R an aliphatic or aromatic hydrocarbon unit of unspecified length