OpenLegislation

Division 4.1.5.2 Test cycleF1

United Kingdom

Original text. Later amendments are not shown.

A number of test runs are made in order to measure the wet grip index of a set of candidate tyres (T) according to the following procedure, whereby each test run shall be made in the same direction and up to three different sets of candidate tyres may be measured within the same test cycle:

  1. (1)

    First, the set of reference tyres are mounted on the instrumented passenger car.

  2. (2)

    After at least three valid measurements have been made in accordance with section 4.1.5.1, the set of reference tyres is replaced by a set of candidate tyres.

  3. (3)

    After six valid measurements of the candidate tyres are performed, two more sets of candidate tyres may be measured.

  4. (4)

    The test cycle is closed by three more valid measurements of the same set of reference tyres as at the beginning of the test cycle.

  1. EXAMPLES:

Annotations

Textual amendments

F1

Inserted by Commission Regulation (EU) No 228/2011 of 7 March 2011 amending Regulation (EC) No 1222/2009 of the European Parliament and of the Council with regard to the wet grip testing method for C1 tyres (Text with EEA relevance).