Appendix ANNEX II Model Information documents to be supplied by the manufacturer
United Kingdom
Part 1
Information document relating to the F1GB type-approval of a vehicle with regard to pedestrian protection
Part 2
Information document relating to the GB type-approval of a vehicle with regard to it being fitted with a frontal protection system
Part 3
Information document relating to the GB type-approval of a frontal protection system to be supplied as a separate technical unit
PART 1
MODEL
Information document No … relating to the F2GB type-approval of a vehicle with regard topedestrian protection
The following information, if applicable, shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.
If the systems, components or separate technical units have electronic controls, information concerning their performance shall be supplied.
0.
GENERAL
0.1.
Make (trade name of manufacturer):
0.2.
Type:
0.2.1.
Commercial name(s) (if available):
0.3.
0.3.1.
Location of that marking:
0.4.
Category of vehicleM3:
0.5.
Name and address of manufacturer:
0.8.
Name(s) and address(es) of assembly plant(s):
0.9.
Name and address of the manufacturer’s representative (if any):
1.
GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE
1.1.
Photographs and/or drawings of a representative vehicle:
1.6.
Position and arrangement of the engine:
9.
BODYWORK
9.1.
Type of bodywork:
9.2.
Materials used and methods of construction:
9.23.
Pedestrian protection
9.23.1.
A detailed description, including photographs and/or drawings, of the vehicle with respect to the structure, the dimensions, the relevant reference lines and the constituent materials of the frontal part of the vehicle (interior and exterior) shall be provided. This description shall include detail of any active protection system installed.
PART 2
MODEL
Information document No … relating to the F3GB type-approval of a vehicle with regard to it being fitted with a frontal protection system
The following information, if applicable, shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.
If the systems, components or separate technical units make use of specialist materials, information concerning their performance shall be supplied.
0.
GENERAL
0.1.
Make (trade name of manufacturer):
0.2.
Type:
0.2.1.
Commercial name(s) (if available):
0.3.
Means of identification of type, if marked on the vehicle:
0.3.1.
Location of that marking:
0.4.
Category of vehicle:
0.5.
Name and address of manufacturer:
0.7.
Location and method of affixing of the GB type-approval mark:
0.8.
Name(s) and address(es) of assembly plant(s):
0.9.
Name and address of the manufacturer’s representative (if any):
1.
GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE
1.1.
Photographs and/or drawings of a representative vehicle:
2.
MASSES AND DIMENSIONS: (in kg and mm) (Refer to drawing where applicable)
2.8.
Technically permissible maximum laden mass stated by the manufacturer:
2.8.1.
Distribution of this mass among the axles (maximum and minimum):
9.
BODYWORK
9.1.
Type of bodywork:
9.24.
Frontal protection system
9.24.1.
General arrangement (drawings or photographs) indicating the position and attachment of the frontal protection systems:
9.24.2.
Drawings and/or photographs, where relevant, of air intake grilles, radiator grille, decorative trim, badges, emblems and recesses and any other external projections and parts of the exterior surface which can be regarded as critical (e.g. lighting equipment). If the parts listed in the first sentence are not critical, for documentation purposes they may be replaced by photographs, accompanied if necessary by dimensional details and/or text:
9.24.3.
Complete details of fittings required and full instructions, including torque requirements, for fitting:
9.24.4.
Drawing of bumpers:
9.24.5.
Drawing of the floor line at the vehicle front end:
PART 3
MODEL
Information document No … relating to the F4GB type-approval of a frontal protection system to be supplied as a separate technical unit
The following information, if applicable, shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.
If the systems, components or separate technical units make use of specialist materials, information concerning their performance shall be supplied.
0.
GENERAL
0.1.
Make (trade name of manufacturer):
0.2.
Type:
0.2.1.
Commercial name(s) (if available):
0.5.
Name and address of manufacturer:
0.7.
Location and method of affixing of the GB type-approval mark:
0.8.
Name(s) and address(es) of assembly plant(s):
0.9.
Name and address of the manufacturer’s representative (if any):
1.
DESCRIPTION OF THE DEVICE
1.1.
Detailed technical description (including photographs or drawings):
1.2.
Assembly and mounting instructions, including required torques:
1.3.
Listing of vehicle types to which it may be fitted:
1.4.
Any restrictions of use and conditions for fitting:
Annotations
Textual amendments
- F1
Word in Annex 2 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 51(4)(a)
- F2
Word in Annex 2 Pt. 1 heading substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 51(4)(b)
- F3
Words in Annex 2 Pt. 2 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 51(4)(c)
- F4
Words in Annex 2 Pt. 3 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 51(4)(c)
Marginal citations
- M1
If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).
- M2
Delete where not applicable (there are cases where nothing needs to be deleted when more than one entry is applicable).
- M3
Classified according to the definitions listed in [Article 4 of Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles]. [Editorial Note: words in Annex 2 Pt. 3 note substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 51(5)]