OpenLegislation

Division 5.5.1.2

Original text. Later amendments are not shown.

The outer jacket:

  1. (a)

    a label as set out in section 3.1 of Annex V;

  2. (b)

    a prohibition of additional welding, milling and stamping;

  3. (c)

    an allowed orientation of the tank in the vehicle;

  4. (d)

    an identification plate with the following information:

    1. i..

      name of the manufacturer

    2. ii..

      serial number

    3. iii..

      water volume in litres

    4. iv..

      Maximum Allowable Working Pressure (MAWP) [MPa]

    5. v..

      year and month of manufacturing (e.g. 2009/01)

    6. vi..

      operating temperature range

the identification plate shall be legible while installed.