OpenLegislation

Division 6.3.7.1.1

Original text. Later amendments are not shown.

The burst pressure shall be at least equal to the burst pressure used for the mechanical calculations. For steel tanks that is:

  1. (a)

    either the Maximum Allowable Working Pressure (MAWP) (in MPa) plus 0,1 MPa multiplied by 3,25;

  2. (b)

    or the Maximum Allowable Working Pressure (MAWP) (in MPa) plus 0,1 MPa multiplied by 1,5 and multiplied by Rm/Rp, where Rm means minimum ultimate tensile strength and Rp means minimum yield strength.