Annex VII Standards referenced by this Regulation
United Kingdom
References to standards in this Regulation shall be understood to refer to the following versions of the standards:
| ISO 188:2007 | Rubber, vulcanised or thermoplastic — Accelerated ageing and heat resistance tests |
| ISO 306:2004 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ISO 527-2:1993/Cor 1:1994 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 1431-1:2004/Amd 1:2009 | Rubber, vulcanised or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing |
| ISO 2768-1:1989 | General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications |
| ISO 2808:2007 | Paints and varnishes — Determination of film thickness |
| ISO 3864-1:2002 | Graphical symbols – Safety colours and safety signs – Part 1: Design principles for safety signs in workplaces and public areas |
| ISO 4624:1978 | Paints and varnishes — Pull-off test for adhesion |
| ISO 6506-1:2005 | Metallic materials — Brinell hardness test — Part 1: Test method |
| ISO 6957:1988 | Copper alloys — Ammonia test for stress corrosion resistance |
| ISO 7225:2005 | Gas cylinders — Precautionary labels |
| ISO 7866:1999 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| ISO 8491:2004 | Metallic materials — Tube (in full section) — Bend test |
| ISO 9227:2006 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 9809-1:1999 | Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| ISO 9809-2:2000 | Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| ISO 11114-1:1997 | Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials |
| ISO 11114-4:2005 | Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement |
| ISO/TS 14687-2:2008 | Hydrogen fuel — Product specification — Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles |
| EN 1251-2:2000/AC:2006 | Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Design, fabrication, inspection and testing |
| EN 1252-1:1998/AC:1998 | Cryogenic vessels — Materials — Part 1: Toughness requirements for temperatures below – 80 °C |
| EN 1797:2001 | Cryogenic vessels — Gas/material compatibility |
| EN 1964-3:2000 | Transportable gas cylinders — Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres — Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1 100 MPa |
| EN 10204:2004 | Metallic products — Types of inspection documents |
| EN 12300:1998/A1:2006 | Cryogenic vessels — Cleanliness for cryogenic service |
| EN 12434:2000/AC:2001 | Cryogenic vessels — Cryogenic flexible hoses |
| EN 12862:2000 | Transportable gas cylinders — Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| EN 13322-2:2003/A1:2006 | Transportable gas cylinders — Refillable welded steel gas cylinders — Design and construction — Part 2: Stainless steel |
| EN 13648-1:2008 | Cryogenic vessels — Safety devices for protection against excessive pressure — Part 1: Safety valves for cryogenic service |
| EN 13648-2:2002 | Cryogenic vessels — Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices for cryogenic service |
| EN 13648-3:2002 | Cryogenic vessels — Safety devices for protection against excessive pressure — Part 3: Determination of required discharge — Capacity and sizing |
| ASTM B117 - 07a | Standard practice for operating salt spray (fog) apparatus |
| ASTM D522 - 93a(2008) | Standard test methods for mandrel bend test of attached organic coatings |
| ASTM D572 - 04 | Standard test method for rubber — Deterioration by heat and oxygen |
| ASTM D1308 - 02(2007) | Standard test method for effect of household chemicals on clear and pigmented organic finishes |
| ASTM D2344 / D2344M - 00(2006) | Standard test method for short-beam strength of polymer matrix composite materials and their laminates |
| ASTM D2794 - 93(2004) | Standard test method for resistance of organic coatings to the effects of rapid deformation (impact) |
| ASTM D3170 - 03(2007) | Standard test method for chipping resistance of coatings |
| ASTM D3359 - 08 | Standard test methods for measuring adhesion by tape test |
| ASTM D3418 - 08 | Test method for transition temperatures and enthalpies of fusion and crystallisation of polymers by differential scanning calorimetry |
| ASTM G154 - 06 | Standard practice for operating fluorescent light apparatus for UV exposure of non-metallic materials |