Division 1 SPACE HEATERS

For space heaters, the technical documentation referred to in Article 3(1)(c) shall include:

1. (a)

   the name and address of the supplier;

2. (b)

   a description of the space heater model sufficient for its unambiguous identification;

3. (c)

   where appropriate, the references of the F1designated standards applied;

4. (d)

   where appropriate, the other technical standards and specifications used;

5. (e)

   the identification and signature of the person empowered to bind the supplier;

6. (f)

   technical parameters:

   • for boiler space heaters and cogeneration space heaters, the technical parameters set out in Table 7, measured and calculated in accordance with Annex VII;

   • for heat pump space heaters, the technical parameters set out in Table 8, measured and calculated in accordance with Annex VII;

   • for heat pump space heaters where the information relating to a specific model comprising a combination of indoor and outdoor units has been obtained by calculation on the basis of design and/or extrapolation from other combinations, the details of such calculations and/or extrapolations, and of any tests undertaken to verify the accuracy of the calculations, including details of the mathematical model for calculating the performance of such combinations and details of the measurements taken to verify this model;

7. (g)

   any specific precautions that shall be taken when the space heater is assembled, installed or maintained.