OpenLegislation

Commission Delegated Regulation (EU) No 811/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of space heaters, combination heaters, packages of space heater, temperature control and solar device and packages of combination heater, temperature control and solar device (Text with EEA relevance)

EU Regulation No 811/2013 · Adopted 18 February 2013 · Extends to United Kingdom

Original text. legislation.gov.uk does not revise this item, so later amendments are not shown here. Changes made to it are listed under each provision when known.

Commission Delegated Regulation (EU) No 811/2013

of 18 February 2013

supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of space heaters, combination heaters, packages of space heater, temperature control and solar device and packages of combination heater, temperature control and solar device

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Directive 2010/30/EU of the European Parliament and of the Council of 19 May 2010 on the indication by labelling and standard product information of the consumption of energy and other resources by energy-related productsf1, and in particular Article 10 thereof,

Whereas:

(1)

Directive 2010/30/EU requires the Commission to adopt delegated acts as regards the labelling of energy-related products that have a significant potential for energy savings but exhibit a wide disparity in performance levels with equivalent functionality.

(2)

The energy consumed by space heaters and by combination heaters providing space and water heating, accounts for a significant share of the total energy demand in the Union. Space heaters and combination heaters with equivalent functionality exhibit a wide disparity in terms of energy efficiency. The scope for reducing their energy consumption is significant and includes combining them with appropriate temperature controls and solar devices. Space heaters, combination heaters and packages of such heaters in combination with temperature controls and solar devices should therefore be covered by energy labelling requirements.

(3)

Space heaters and combination heaters that are designed for using gaseous or liquid fuels predominantly (more than 50 %) produced from biomass have specific technical characteristics which require further technical, economic and environmental analyses. Depending on the outcome of the analyses, energy labelling requirements for those heaters should be set at a later stage, if appropriate.

(4)

Harmonised provisions should be laid down on labelling and standard product information regarding the energy efficiency of space heaters and combination heaters in order to provide incentives for manufacturers to improve the energy efficiency of these heaters, to encourage end-users to purchase energy-efficient products and to contribute to the functioning of the internal market.

(5)

As regards significant energy and cost savings for each type of heater, this Regulation should introduce a new labelling scale from A++ to G for the space heating function of boiler space heaters, cogeneration space heaters, heat pump space heaters, boiler combination heaters and heat pump combination heaters. While classes A to G cover the various types of conventional boilers when not combined with cogeneration or renewable energy technologies, classes A+ and A++ should promote the use of cogeneration and renewable energy sources.

(6)

Furthermore, a new A-G labelling scale should be introduced for the water heating function of boiler combination heaters and heat pump combination heaters, in line with Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar devicef2.

(7)

Further classes A+++ and A+ should be added after four years to the seasonal space heating and water heating classes, respectively, unless the review of the Regulation proves otherwise, to accelerate the market penetration of high-efficiency space heaters and combination heaters using renewable energy sources.

(8)

This Regulation should ensure that consumers get more accurate comparative information about the performance of heat pump heaters, based on a seasonal efficiency calculation and measurement method for three European climate zones. The Commission mandated the European standardisation bodies to investigate whether a similar method should be developed for other heaters. European standardised heating seasons for boiler heaters, cogeneration heaters and solar heaters could be considered in the review of this Regulation.

(9)

The sound power level of a heater can be an important consideration for end-users. Information on sound power levels should be included on the labels of space heaters and combination heaters.

(10)

The combined effect of this Regulation and Commission Regulation (EU) No 813/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for space heaters and combination heatersf3 is expected to result in estimated annual energy savings of around 1 900 PJ (about 45 Mtoe) by 2020, corresponding to about 110 Mt CO2 emissions, compared to what would happen if no measures were taken.

(11)

The information provided on the label should be obtained through reliable, accurate and reproducible measurement and calculation procedures that take into account recognised state-of-the-art measurement and calculation methods including, where available, harmonised standards adopted by the European standardisation bodies under a request from the Commission, in accordance with the procedures laid down in the Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations and of rules on Information Society servicesf4, for the purpose of establishing ecodesign requirements.

(12)

This Regulation should specify a uniform design and content of product labels for space heaters and combination heaters.

(13)

In addition, this Regulation should specify requirements for the product fiche and technical documentation for space heaters and combination heaters.

(14)

Moreover, this Regulation should specify requirements for the information to be provided for any form of distance selling of space heaters and combination heaters and in any advertisements and technical promotional material for such heaters.

(15)

In addition to the product labels and fiches for stand-alone space heaters and combination heaters laid down in this Regulation, package labels and fiches based on product fiches from suppliers should ensure that the end-user has easy access to information on the energy performance of packages of heaters combined with solar devices and/or temperature controls. The most efficient class A+++ may be reached by such a package.

(16)

It is appropriate to provide for a review of the provisions of this Regulation taking into account technological progress,

HAS ADOPTED THIS REGULATION:

Annotations to the whole text

Footnotes

f1

OJ L 153, 18.6.2010, p. 1.

f2

See page 83 of this Official Journal.

f3

See page 136 of this Official Journal.

f4

OJ L 204, 21.7.1998, p. 37.

Contents

  1. 1Subject matter and scope
  2. 2Definitions
  3. 3Responsibilities of suppliers and timetable
  4. 4Responsibilities of dealers
  5. 5Measurement and calculation methods
  6. 6Verification procedure for market surveillance purposes
  7. 7Review Repealed
  8. 8Entry into force and application
  9. Signature
  10. Annex IDefinitions applicable for Annexes II to VIII
  11. Annex II: Energy efficiency classes
  12. 1SEASONAL SPACE HEATING ENERGY EFFICIENCY CLASSES
  13. 2WATER HEATING ENERGY EFFICIENCY CLASSES
  14. 3ENERGY EFFICIENCY CLASSES OF SOLAR HOT WATER STORAGE TANKS, IF (PART OF) A SOLAR DEVICE
  15. Annex III: The labels
  16. SPACE HEATERS
  17. Label 1
  18. 1.1.1Boiler space heaters in seasonal space heating energy efficiency classes A++ to G
  19. 1.1.2Cogeneration space heaters in seasonal space heating energy efficiency classes A++ to G
  20. 1.1.3Heat pump space heaters, except low-temperature heat pumps, in seasonal space heating energy efficiency classes A++ to G
  21. 1.1.4Low-temperature heat pumps in seasonal space heating energy efficiency classes A++ to G
  22. Label 2
  23. 1.2.1Boiler space heaters in seasonal space heating energy efficiency classes A+++ to D
  24. 1.2.2Cogeneration space heaters in seasonal space heating energy efficiency classes A+++ to D
  25. 1.2.3Heat pump space heaters, except low-temperature heat pumps, in seasonal space heating energy efficiency classes A+++ to D
  26. 1.2.4Low-temperature heat pumps in seasonal space heating energy efficiency classes A+++ to D
  27. COMBINATION HEATERS
  28. Label 1
  29. 2.1.1Boiler combination heaters in seasonal space heating energy efficiency classes A++ to G and in water heating energy efficiency classes A to G
  30. 2.1.2Heat pump combination heaters in seasonal space heating energy efficiency classes A++ to G and in water heating energy efficiency classes A to G
  31. Label 2
  32. 2.2.1Boiler combination heaters in seasonal space heating energy efficiency classes A+++ to D and in water heating energy efficiency classes A+ to F
  33. 2.2.2Heat pump combination heaters in seasonal space heating energy efficiency classes A+++ to D and in water heating energy efficiency classes A+ to F
  34. 3PACKAGES OF SPACE HEATER, TEMPERATURE CONTROL AND SOLAR DEVICE
  35. 4PACKAGES OF COMBINATION HEATER, TEMPERATURE CONTROL AND SOLAR DEVICE
  36. 5Division 5
  37. 6Division 6
  38. 7Division 7
  39. 8Division 8
  40. 9Division 9
  41. 10Division 10
  42. 11The design of the label for packages of space heater, temperature control and solar device shall be the following:
  43. 12The design of the label for packages of combination heater, temperature control and solar device shall be the following:
  44. Annex IVProduct fiche
  45. SPACE HEATERS
  46. 1.1The information in the product fiche of the space heater shall be provided in the following order and shall be included in the product brochure or other literature provided with the product:
  47. 1.2Division 1.2
  48. 1.3Division 1.3
  49. COMBINATION HEATERS
  50. 2.1The information in the product fiche of the combination heater shall be provided in the following order and shall be included in the product brochure or other literature provided with the product:
  51. 2.2Division 2.2
  52. 2.3Division 2.3
  53. TEMPERATURE CONTROLS
  54. 3.1The information in the product fiche of the temperature control shall be provided in the following order and shall be included in the product brochure or other literature provided with the product:
  55. 3.2Division 3.2
  56. SOLAR DEVICES
  57. 4.1The information in the product fiche of the solar device shall be provided in the following order and shall be included in the product brochure or other literature provided with the product (for pumps in the collector loop if applicable):
  58. 4.2Division 4.2
  59. 5PACKAGES OF SPACE HEATER, TEMPERATURE CONTROL AND SOLAR DEVICE
  60. 6PACKAGES OF COMBINATION HEATER, TEMPERATURE CONTROL AND SOLAR DEVICE
  61. Annex V: Technical documentation
  62. 1SPACE HEATERS
  63. 2COMBINATION HEATERS
  64. 3TEMPERATURE CONTROLS
  65. 4SOLAR DEVICES
  66. 5PACKAGES OF SPACE HEATER, TEMPERATURE CONTROL AND SOLAR DEVICE
  67. 6PACKAGES OF COMBINATION HEATER, TEMPERATURE CONTROL AND SOLAR DEVICE
  68. Annex VI: Information to be provided in the cases where end-users cannot be expected to see the product displayed, except on the internet
  69. SPACE HEATERS
  70. 1.1The information referred to in Article 4(1)(b) shall be provided in the following order:
  71. 1.2Division 1.2
  72. COMBINATION HEATERS
  73. 2.1The information referred to in Article 4(2)(b) shall be provided in the following order:
  74. 2.2Division 2.2
  75. PACKAGES OF SPACE HEATER, TEMPERATURE CONTROL AND SOLAR DEVICE
  76. 3.1The information referred to in Article 4(3)(b) shall be provided in the following order:
  77. 3.2Division 3.2
  78. PACKAGES OF COMBINATION HEATER, TEMPERATURE CONTROL AND SOLAR DEVICE
  79. 4.1The information referred to in Article 4(4)(b) shall be provided in the following order:
  80. 4.2Division 4.2
  81. Annex VII: Measurements and calculations
  82. 1Division 1
  83. General conditions for measurements and calculations
  84. (a)Division (a)
  85. (b)Division (b)
  86. (c)Division (c)
  87. (d)Division (d)
  88. Seasonal space heating energy efficiency and consumption of boiler space heaters, boiler combination heaters and cogeneration space heaters
  89. (a)Division (a)
  90. (b)Division (b)
  91. Seasonal space heating energy efficiency and consumption of heat pump space heaters and heat pump combination heaters
  92. (a)Division (a)
  93. (b)The active mode coefficient of performance SCOPon for average, colder and warmer climate conditions shall be calculated on the basis of the part load for heating Ph(Tj), the supplementary capacity for heatingsup(Tj) (if applicable), and the bin-specific coefficient of performance COPbin(Tj) or bin-specific primary energy ratio PERbin(Tj), weighted by the bin-hours for which the bin conditions apply, using the following conditions:
  94. (c)Division (c)
  95. (d)The annual energy consumption QHE shall be calculated as the sum of:
  96. (e)Division (e)
  97. (f)Division (f)
  98. (g)Division (g)
  99. 5Water heating energy efficiency of combination heaters
  100. 6Conditions for measurements and calculations of solar devices
  101. Annex VIIIProduct compliance verification by market surveillance authorities
  102. Annex IX: Information to be provided in the case of sale, hire or hire-purchase through the internet
  103. (1)For the purpose of points 2 to 5 of this Annex the following definitions shall apply:
  104. (2)Division (2)
  105. (3)The image used for accessing the label in the case of nested display shall:
  106. (4)In the case of nested display, the sequence of display of the label shall be as follows:
  107. (5)Division (5)