Division 4 SOLAR DEVICES

For solar devices, the technical documentation referred to in Article 3(4)(b) shall include:

1. (a)

   the name and address of the supplier;

2. (b)

   a description of the solar device model sufficient for its unambiguous identification;

3. (c)

   where appropriate, the references of the F1designated standards applied;

4. (d)

   where appropriate, the other technical standards and specifications used;

5. (e)

   the identification and signature of the person empowered to bind the supplier;

6. (f)

   technical parameters (for pumps in the collector loop if applicable):

   • the collector aperture area A_sol in m², to two decimal places;

   • the collector efficiency η_col in %, rounded to the nearest integer;

   • the energy efficiency class of the solar hot water storage tank, determined in accordance with point 3 of Annex II;

   • the standing loss S of the solar hot water storage tank in W, rounded to the nearest integer;

   • the storage volume V of the solar hot water storage tank in litres and m³;

   • the annual non-solar heat contribution Q_nonsol in kWh in terms of primary energy for electricity and/or in kWh in terms of GCV for fuels, for the load profiles M, L, XL and XXL under average climate conditions, rounded to the nearest integer;

   • the pump power consumption solpump in W, rounded to the nearest integer;

   • the standby power consumption solstandby in W, to two decimal places;

   • the annual auxiliary electricity consumption Q_aux in kWh in terms of final energy, rounded to the nearest integer;

7. (g)

   any specific precautions that shall be taken when the solar device is assembled, installed or maintained.