Division 6.2.2

In the case when an overload protector is fitted or intended to be fitted within the inertia braking system, the wheel brake shall be tested with the following test forces or pressures:

1. 6.2.2.1.

   The minimum design values for an overload protector shall be specified by the manufacturer and shall not be less than

   P_op = 1,2 P* or p_op = 1,2 p*

2. 6.2.2.2.

   The ranges of minimum test force P_Top or minimum test pressure p_Top and the minimum test torque M_Top are:

   P_Top = 1,1 to 1,2 P* or p_Top = 1,1 to 1,2 p*

   and

   M_Top = 1,1 to 1,2 M*

3. 6.2.2.3.

   The maximum values (P_op_max or p_op_max) for the overload protector shall be specified by the manufacturer and shall not be more than P_T or p_T respectively.