Annex III CONFORMITY ASSESSMENT PROCEDURES FOR SUBSYSTEMS AND SAFETY COMPONENTS: MODULE B: TYPE EXAMINATION — PRODUCTION TYPEF1

United Kingdom

1. 1Division 1
2. 2Division 2
3. 3The manufacturer shall lodge an application for type examination with a single approved body of his choice.
4. 4The approved body shall:
5. 5Division 5
6. 6Where the type meets the requirements of this Regulation, the approved body shall issue a type examination certificate to the manufacturer. The certificate shall contain the name and address of the manufacturer, the conclusions of the examination, any conditions for its validity, the necessary data for identification of the approved type (subsystem or safety component) and if relevant, descriptions of its functioning. The certificate may have one or more annexes attached.
7. 7The approved body shall keep itself apprised of any changes in the generally acknowledged state of the art which indicate that the approved type may no longer comply with the applicable requirements of this Regulation and shall determine whether such changes require further investigation. If so, the approved body shall inform the manufacturer accordingly.
8. 8Each approved body shall inform the Secretary of State concerning the type examination certificates and/or any additions thereto which it has issued or withdrawn, and shall, periodically or upon request, make available to the Secretary of State the list of such certificates and/or any additions thereto refused, suspended or otherwise restricted.
9. 9Division 9
10. 10Division 10