Division 6.2 The ... type-examination certificate shall contain at least the following information:F1

the name and identification number of the F2approved body;

the name and address of the manufacturer and, if the application is lodged by the authorised representative, the latter's name and address;

identification of the PPE covered by the certificate (type number);

a statement that the PPE type complies with the applicable essential health and safety requirements;

where F3designated standards have been fully or partially applied, the references of those standards or parts thereof;

where other technical specifications have been applied, their references;

where applicable, the performance level(s) or protection class of the PPE;

for PPE produced as a single unit to fit an individual user, the range of permissible variations of relevant parameters based on the approved basic model;

the date of issue, the date of expiry and, where appropriate, the date(s) of renewal;

any conditions attached to the issue of the certificate;

for category III PPE, a statement that the certificate shall only be used in conjunction with one of the conformity assessment procedures referred to in point (c) of Article 19.