OpenLegislation

Division 4.3.2.5.3 Aerodynamic drag modelling

Original text. Later amendments are not shown.

The aerodynamic drag coefficient CD(Y) shall be modelled as a four-term polynomial as a function of yaw angle Y as in the equation below:

CDY=a0+ a1Y+ a2Y2+ a3Y3+ a4Y4

a0 to a4 are constant coefficients whose values are determined in the data analysis.

The aerodynamic drag shall be determined by combining the drag coefficient with the vehicle’s frontal area Af and the relative wind velocity vr:

Daero=12× ρ× Af× v2r× CDYDaero=12× ρ× Af× v2ra0+ a1Y+ a2Y2+ a3Y3+ a4Y4

Notes on Division 4.3.2.5

Textual amendments

F1

Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).

F2

Inserted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).