OpenLegislation

Division 4.3.2.5 Determination of the equation of motion

Original text. Later amendments are not shown.

F1Symbols used in the on-board anemometer equations of motion are listed in Table A4/5.

Table A4/5

Symbols used in the on-board anemometer equations of motion

SymbolUnitsDescription
Afm2frontal area of the vehicle
a0 … andegrees-1Aerodynamic drag coefficients as a function of yaw angle
AmNmechanical drag coefficient
BmN/(km/h)mechanical drag coefficient
CmN/(km/h)2mechanical drag coefficient
CD(Y)aerodynamic drag coefficient at yaw angle Y
DNdrag
DaeroNaerodynamic drag
DfNfront axle drag (including driveline)
DgravNgravitational drag
DmechNmechanical drag
DrNrear axle drag (including driveline)
DtyreNtyre rolling resistance
(dh/ds)—sine of the slope of the track in the direction of travel (+ indicates ascending)
(dv/dt)m/s2acceleration
gm/s2gravitational constant
mavkgarithmetic average mass of the test vehicle before and after road load determination
F2mekgeffective vehicle inertia including rotating components
ρkg/m3air density
tstime
TKTemperature
vkm/hvehicle speed
vrkm/hrelative wind speed
Ydegreesyaw angle of apparent wind relative to direction of vehicle travel
  1. 4.3.2.5.1General form
  2. 4.3.2.5.2Mechanical drag modelling
  3. 4.3.2.5.3Aerodynamic drag modelling
  4. 4.3.2.5.4Final equation of motion

Annotations

Textual amendments

F1

Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).

F2

Inserted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).