OpenLegislation

Division 4.5.5.2.1 Correction to reference conditions

Original text. Later amendments are not shown.

C*=c0− w2− K1+ c1v×1+ K0T− 20+ K2c2v2

where:

C*
  • is the corrected running resistance, Nm;

  • c0
  • is the constant term as determined in paragraph 4.4.4. of this Sub-Annex, Nm;

  • F1c1
  • is the coefficient of the first order term as determined in paragraph 4.4.4., Nm/(km/h);

  • c2
  • is the coefficient of the second order term as determined in paragraph 4.4.4., Nm/(km/h)2;

  • K0
  • is the correction factor for rolling resistance as defined in paragraph 4.5.2.of this Sub-Annex;

  • K1
  • is the test mass correction as defined in paragraph 4.5.4. of this Sub-Annex;

  • K2
  • is the correction factor for air resistance as defined in paragraph 4.5.1.of this Sub-Annex;

  • v
  • is the vehicle velocity, km/h;

  • T
  • is the arithmetic average atmospheric temperature, °C;

  • w2
  • is the wind correction resistance as defined in paragraph 4.5.3. of this Sub-Annex.

  • Annotations

    Textual amendments

    F1

    Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).