OpenLegislation

Division 4.5.5.2.2 Correction for installed torque meters

Original text. Later amendments are not shown.

If the running resistance is determined according to the torque meter method, the running resistance shall be corrected for effects of the torque measurement equipment installed outside the vehicle on its aerodynamic characteristics.

The running resistance coefficient c2 shall be corrected according to the following equation:

c2corr=K2× c2×1+ΔCD× Af∕CD'× Af'

where,

Δ(CD × Af) = (CD × Af) - (CD’ × Af’)

CD’ × Af’
  • is the product of the aerodynamic drag coefficient multiplied by the frontal area of the vehicle with the torque meter measurement equipment installed measured in a wind tunnel fulfilling the criteria of paragraph 3.2. of this Sub-Annex, m2;

  • CD × Af
  • is the product of the aerodynamic drag coefficient multiplied by the frontal area of the vehicle with the torque meter measurement equipment not installed measured in a wind tunnel fulfilling the criteria of paragraph 3.2. of this Sub-Annex, m2.