Division 6.5.1.2 Vehicle restraint system
The dynamometer shall be equipped with a centring device aligning the vehicle within a tolerance of ± 0.5 degrees of rotation around the z-axis. The restraint system shall maintain the centred drive wheel position throughout the coastdown runs of the road load determination within the following limits:
- 6.5.1.2.1.
Lateral position (y-axis)
The vehicle shall remain aligned in the y-direction and lateral movement shall be minimised.
- 6.5.1.2.2.
Front and rear position (x-axis)
Without prejudice to the requirement of paragraph 6.5.1.2.1. of this Sub-Annex, both wheel axes shall be within ± 10 mm of the belt’s lateral centre lines.
- 6.5.1.2.3.
Vertical force
The restraint system shall be designed so as to impose no vertical force on the drive wheels.