OpenLegislation

Division 3.4.3.3.3.1 The air flow rate, Qs at each test point shall be calculated from the flow meter data using the manufacturer's prescribed method.

Original text. Later amendments are not shown.

Values of the calibration coefficient shall be calculated for each test point:

Kv=QsTvPv

where:

Qs
  • is the flow rate, m3/min at 273,15 K (0 °C) and 101,325, kPa;

  • Tv
  • is the temperature at the venturi inlet, Kelvin (K);

  • Pv
  • is the absolute pressure at the venturi inlet, kPa.