Division 1.2.3.5 F1
After the second test, the arithmetic average results of the two tests shall be calculated. If all criteria in row 2 of the applicable Table A6/2 are fulfilled by these arithmetic average results, all values declared by the manufacturer shall be accepted as the type approval value. If any one of the criteria in row 2 of the applicable Table A6/2 is not fulfilled, a third test shall be performed with the same vehicle.
Annotations
Textual amendments
Notes on Division 1.2.3
Footnotes
- f1
The declared value shall be the value to which the necessary corrections are applied (i.e. Ki, ATCT and DF corrections
- f2
Rounding xxx,xx
- f3
Rounding xxx,x
- f4
Each test result shall fulfil the regulation limit.
- f5
‘0,9’ shall be replaced by ‘1,0’ for charge-depleting Type 1 test for OVC-HEVs, only if the charge-depleting test contains two or more applicable WLTC cycles.
- f6
Each test result shall fulfil the regulation limit.