OpenLegislation

Division 1.2.3 Determination of total cycle valuesF1

Original text. Later amendments are not shown.

Table A6/1

Applicable rules for a manufacturer's declared values (total cycle values)f1

The declared value shall be the value to which the necessary corrections are applied (i.e. Ki, ATCT and DF corrections

Rounding xxx,xx

Rounding xxx,x

Vehicle typeMCO2f2(g/km)FC(kg/100 km)Electric energy consumptionf3(Wh/km)All electric range/Pure Electric Range(km)
Vehicles tested in accordance with Sub-Annex 6 (pure ICE)

MCO2

Paragraph 3. of Sub-Annex 7.

———
NOVC-FCHV—

FCCS

Paragraph 4.2.1.2.1. of Sub-Annex 8.

——
NOVC-HEV

MCO2,CS

Paragraph 4.1.1. of Sub-Annex 8.

———
OVC-HEVCD

MCO2,CD

Paragraph 4.1.2. of.

—

ECAC,CD

Paragraph 4.3.1. of Sub-Annex 8.

AER

Paragraph 4.4.1.1. of Sub-Annex 8.

CS

MCO2,CS Sub-Annex 8

Paragraph 4.1.1. of Sub-Annex 8.

———
PEV——

ECWLTC

Paragraph 4.3.4.2. of Sub-Annex 8.

PERWLTC

Paragraph 4.4.2. of Sub-Annex 8.

Table A6/2

Criteria for number of tests

For pure ICE vehicles, NOVC-HEVs and OVC-HEVs charge-sustaining Type 1 test.

Each test result shall fulfil the regulation limit.

TestJudgement parameterCriteria emissionMCO2
Row 1First testFirst test results≤ Regulation limit × 0,9≤ Declared value × dCO21
Row 2Second testArithmetic average of the first and second test results≤ Regulation limit × 1,0f4≤ Declared value × dCO22
Row 3Third testArithmetic average of three test results≤ Regulation limit × 1,0≤ Declared value × dCO23
For OVC-HEVs charge-depleting Type 1 test.

‘0,9’ shall be replaced by ‘1,0’ for charge-depleting Type 1 test for OVC-HEVs, only if the charge-depleting test contains two or more applicable WLTC cycles.

Each test result shall fulfil the regulation limit.

TestJudgement parameterCriteria emissionsMCO2,CDAER
Row 1First testFirst test results≤ Regulation limit × 0,9f5≤ Declared value × dCO21≥ Declared value × 1,0
Row 2Second testArithmetic average of the first and second test results≤ Regulation limit × 1,0f6≤ Declared value × dCO22≥ Declared value × 1,0
Row 3Third testArithmetic average of three test results≤ Regulation limit × 1,0≤ Declared value × dCO23≥ Declared value × 1,0
For PEVs
TestJudgement parameterElectric energy consumptionPER
Row 1First testFirst test results≤ Declared value × 1,0≥ Declared value × 1,0
Row 2Second testArithmetic average of the first and second test results≤ Declared value × 1,0≥ Declared value × 1,0
Row 3Third testArithmetic average of three test results≤ Declared value × 1,0≥ Declared value × 1,0
For NOVC-FCHVs
TestJudgement parameterFCCS
Row 1First testFirst test results≤ Declared value × 1,0
Row 2Second testArithmetic average of the first and second test results≤ Declared value × 1,0
Row 3Third testArithmetic average of three test results≤ Declared value × 1,0
  1. 1.2.3.1Division 1.2.3.1
  2. 1.2.3.2Division 1.2.3.2
  3. 1.2.3.3Division 1.2.3.3
  4. 1.2.3.4Division 1.2.3.4
  5. 1.2.3.5Division 1.2.3.5
  6. 1.2.3.6Division 1.2.3.6
  7. 1.2.3.7Division 1.2.3.7
  8. 1.2.3.8Determination of the acceptance value dCO21, dCO22 and dCO23
  9. 1.2.3.9Division 1.2.3.9
  10. Figure A6/1Flowchart for the number of Type 1 tests

Annotations

Textual amendments

F1

Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).

Footnotes

f1

The declared value shall be the value to which the necessary corrections are applied (i.e. Ki, ATCT and DF corrections

f2

Rounding xxx,xx

f3

Rounding xxx,x

f4

Each test result shall fulfil the regulation limit.

f5

‘0,9’ shall be replaced by ‘1,0’ for charge-depleting Type 1 test for OVC-HEVs, only if the charge-depleting test contains two or more applicable WLTC cycles.

f6

Each test result shall fulfil the regulation limit.