OpenLegislation

Division 1.2.3.9 F1

Original text. Later amendments are not shown.

In the case that a test result or an average of test results was taken and confirmed as the type approval value, this result shall be referred to as the ‘declared value’ for further calculations.

Annotations

Textual amendments

F1

Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).

Notes on Division 1.2.3

Footnotes

f1

The declared value shall be the value to which the necessary corrections are applied (i.e. Ki, ATCT and DF corrections

f2

Rounding xxx,xx

f3

Rounding xxx,x

f4

Each test result shall fulfil the regulation limit.

f5

‘0,9’ shall be replaced by ‘1,0’ for charge-depleting Type 1 test for OVC-HEVs, only if the charge-depleting test contains two or more applicable WLTC cycles.

f6

Each test result shall fulfil the regulation limit.