Division 1.2.3.7 F1
In the case that any one of the criterion of the applicable Table A6/2 is not fulfilled after the first or second test, at the request of the manufacturer and with the approval of the approval authority, the values may be re-declared as higher values for emissions or consumption, or as lower values for electric ranges, in order to reduce the required number of tests for type approval.
Annotations
Textual amendments
Notes on Division 1.2.3
Footnotes
- f1
The declared value shall be the value to which the necessary corrections are applied (i.e. Ki, ATCT and DF corrections
- f2
Rounding xxx,xx
- f3
Rounding xxx,x
- f4
Each test result shall fulfil the regulation limit.
- f5
‘0,9’ shall be replaced by ‘1,0’ for charge-depleting Type 1 test for OVC-HEVs, only if the charge-depleting test contains two or more applicable WLTC cycles.
- f6
Each test result shall fulfil the regulation limit.