OpenLegislation

Division 3.2.1.1.1

Original text. Later amendments are not shown.

The dilution factor DF shall be calculated using the equation for the concerned fuel:

DF=13.4CCO2+CHC+ CCO× 10− 4
  • for petrol (E10)

  • DF=13.5CCO2+CHC+ CCO× 10− 4
  • for diesel (B7)

  • DF=11.9CCO2+CHC+ CCO× 10− 4
  • for LPG

  • DF=9.5CCO2+CHC+ CCO× 10− 4
  • for NG/biomethane

  • DF=12.5CCO2+CHC+ CCO× 10− 4
  • for ethanol (E85)

  • DF=35.03CH2O− CH2O− DA+ CH2× 10− 4
  • for hydrogen

  • With respect to the equation for hydrogen:

    CH2O
  • is the concentration of H2O in the diluted exhaust gas contained in the sample bag, per cent volume;

  • CH2O-DA
  • is the concentration of H2O in the dilution air, per cent volume;

  • CH2
  • is the concentration of H2 in the diluted exhaust gas contained in the sample bag, ppm.

  • If a fuel type is not listed in this paragraph, the DF for that fuel shall be calculated using the equations in paragraph 3.2.1.1.2. of this Sub-Annex.

    If the manufacturer uses a DF that covers several phases, it shall calculate a DF using the mean concentration of gaseous compounds for the phases concerned.

    The mean concentration of a gaseous compound shall be calculated using the following equation:

    C–i=∑nphase= 1Ci,phase× Vmix,phase∑nphase= 1 Vmix,phase

    where:

    Ci
  • is mean concentration of a gaseous compound;

  • Ci,phase
  • is the concentration of each phase;

  • Vmix,phase
  • is the Vmix of the corresponding phase;