OpenLegislation

Division 3.2.3.2.2.4 Calculation of road load coefficients for individual vehiclesF1

Original text. Later amendments are not shown.

The road load coefficients f0, f1 and f2 (as defined in Sub-Annex 4) for test vehicles H and L are referred to as f0,H, f1,H and f2,H, and f0,L, f1,L and f2,L respectively. An adjusted road load curve for the test vehicle L is defined as follows:

FLv=f*0,L+ f1,H× v+ f*2,L× v2

Applying the least squares regression method in the range of the reference speed points, adjusted road load coefficients f*0,L and f*2,L shall be determined for FLv with the linear coefficient f*1,L set to f1,H. The road load coefficients f0,ind, f1,ind and f2,ind for an individual vehicle in the interpolation family shall be calculated using the following equations:

f0,ind=f0,H− Δf0×TMH× RRH− TMind× RRindTMH× RRH− TML× RRL

or, if TMH× RRH− TML× RRL=0, the equation for f0,ind below shall apply:

f0,ind=f0,H− Δf0f1,ind=f1,Hf2,ind=f2,H− Δf2ΔCd× AfLH−ΔCd× AfindΔCd× AfLH

or, if ΔCd× AfLH=0, the equation for F2,ind below shall apply:

f2,ind=f2,H− Δf2

where:

Δf0=f0,H− f*0,LΔf2=f2,H− f*2,L

In the case of a road load matrix family, the road load coefficients f0, f1 and f2 for an individual vehicle shall be calculated according to the equations in paragraph 5.1.1. of Sub-Annex 4.

Annotations

Textual amendments

F1

Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).