OpenLegislation

Division 3.2.3.2.3 Calculation of cycle energy demand

Original text. Later amendments are not shown.

The cycle energy demand of the applicable WLTC, Ek, and the energy demand for all applicable cycle phases Ek,p, shall be calculated according to the procedure in paragraph 5. of this Sub-Annex, for the following sets, k, of road load coefficients and masses:

k=1
  • f0=f*0,L, f1= f1,H, f2= f*2,L, m= TML

    (test vehicle L)

  • k=2
  • f0=f0,H, f1= f1,H, f2= f2,H, m= TMH

    (test vehicle H)

  • k=3
  • f0=f0,ind, f1= f1,H, f2= f2,ind, m= TMind

    (an individual vehicle in the interpolation family)

    F1These three sets of road loads may be derived from different road load families.

  • Annotations

    Textual amendments

    F1

    Inserted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).