OpenLegislation

Division 4.4.2.1.1 The pure -electric range for the applicable WLTP test cycle PERWLTC for PEVs shall be calculated from the shortened Type 1 test as described in paragraph 3.4.4.2. of this Sub-Annex using the following equations:

Original text. Later amendments are not shown.

PERWLTC=UBESTPECDC,WLTC

where:

UBESTP
  • is the usable REESS energy determined from the beginning of the shortened Type 1 test procedure until the break-off criterion as defined in paragraph 3.4.4.2.3. of this Sub-Annex is reached, Wh;

  • ECDC,WLTC
  • is the weighted electric energy consumption for the applicable WLTP test cycle of DS1 and DS2 of the shortened Type 1 test procedure Type 1 test, Wh/km;

  • and

    UBESTP=ΔEREESS,DS1+ ΔEREESS,DS2+ ΔEREESS,CSSM+ ΔEREESS,CCSE

    where:

    ΔEREESS,DS1
  • is the electric energy change of all REESSs during DS1 of the shortened Type 1 test procedure, Wh;

  • ΔEREESS,DS2
  • is the electric energy change of all REESSs during DS2 of the shortened Type 1 test procedure, Wh;

  • ΔEREESS,CSSM
  • is the electric energy change of all REESSs during CSSM of the shortened Type 1 test procedure, Wh;

  • ΔEREESS,CSSE
  • is the electric energy change of all REESSs during CSSE of the shortened Type 1 test procedure, Wh;

  • and

    ECDC,WLTC=∑j= 12ECDC,WLTC,j× KWLTC,j

    where:

    F1ECDC,WLTC,j
  • is the electric energy consumption for the applicable WLTP test cycle of DSj of the shortened Type 1 test procedure according to paragraph 4.3. of this Sub-Annex, Wh/km;

  • kWLTC,j
  • is the weighting factor for the applicable WLTP test cycle of DSj of the shortened Type 1 test procedure;

  • and

    KWLTC,1=ΔEREESS,WLTC,1UBESTP and KWLTC,2= 1− KWLTC,1

    where:

    KWLTC,j
  • is the weighting factor for the applicable WLTP test cycle of DSj of the shortened Type 1 test procedure;

  • ΔEREESS,WLTC,1
  • is the electric energy change of all REESSs during the applicable WLTP test cycle from DS1 of the shortened Type 1 test procedure, Wh;

  • Annotations

    Textual amendments

    F1

    Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).