Division 4.4.2.1.3 The phase-specific pure electric-range PERp for PEVs shall be calculated from the Type 1 test as described in paragraph 3.4.4.2. of this Sub-Annex by using the following equations:
where:
is the usable REESS energy in accordance with paragraph 4.4.2.1.1. of this Sub-Annex, Wh;
is the weighted electric energy consumption for each individual phase of DS1 and DS2 of the shortened Type 1 test procedure, Wh/km;
In the case that phase p = low and phase p = medium, the following equations shall be used:
where:
is the electric energy consumption for phase p where the first phase p of DS1 is indicated as j = 1, the second phase p of DS1 is indicated as j = 2, the first phase p of DS2 is indicated as j = 3 and the second phase p of DS2 is indicated as j = 4 of the shortened Type 1 test procedure according to paragraph 4.3. of this Sub-Annex, Wh/km;
is the weighting factor for phase p where the first phase p of DS1 is indicated as j = 1, the second phase p of DS1 is indicated as j = 2, the first phase p of DS2 is indicated as j = 3, and the second phase p of DS2 is indicated as j = 4 of the shortened Type 1 test procedure;
and
where:
is the energy change of all REESSs during the first phase p of DS1 of the shortened Type 1 test procedure, Wh.
In the case that phase p = high and phase p = extraHigh, the following equations shall be used:
where:
is the electric energy consumption for phase p of DSj of the shortened Type 1 test procedure according to paragraph 4.3. of this Sub-Annex, Wh/km;
is the weighting factor for phase p of DSj of the shortened Type 1 test procedure
and
where:
is the electric energy change of all REESSs during the first phase p of DS1 of the shortened Type 1 test procedure, Wh.