OpenLegislation

Division 4.4.2.2.3 The phase-specific pure electric-range PERp for PEVs shall be calculated from the Type 1 test as described in paragraph 3.4.4.1. of this Sub-Annex using the following equations:

Original text. Later amendments are not shown.

PERp=UBECCPECDC,p

where:

UBECCP
  • is the usable REESS energy according to paragraph 4.4.2.2.1. of this Sub-Annex, Wh;

  • ECDC,p
  • is the electric energy consumption for the considered phase p determined from completely driven phases p of the consecutive cycle Type 1 test procedure, Wh/km;

  • and

    ECDC,p=∑j= 1n pECDC,p,j× Kp,j

    where:

    ECDC,p,j
  • is the jth electric energy consumption for the considered phase p of the consecutive cycle Type 1 test procedure according to paragraph 4.3. of this Sub-Annex, Wh/km;

  • kp,j
  • is the jth weighting factor for the considered phase p of the consecutive cycle Type 1 test procedure;

  • j
  • is the index number of the considered phase p;

  • np
  • is the whole number of complete WLTC phases p driven;

  • and

    Kp,1=ΔEREESS,p,1UBECCP and Kp,j=1− Kp,1np− 1 for j=2 … np

    where:

    ΔEREESS,p,1
  • is the electric energy change of all REESSs during the first driven phase p during the consecutive cycle Type 1 test procedure, Wh.

  • Notes on Division 4.4.2

    Textual amendments

    F1

    Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).