OpenLegislation

Division 4.4.2.2.2 The pure electric range for the WLTP city test cycle PERcity for PEVs shall be calculated from the Type 1 test as described in paragraph 3.4.4.1. of this Sub-Annex using the following equations:

Original text. Later amendments are not shown.

PERcity=UBECCPECDC,city

where:

UBECCP
  • is the usable REESS energy according to paragraph 4.4.2.2.1. of this Sub-Annex, Wh;

  • ECDC,city
  • is the electric energy consumption for the applicable WLTP city test cycle determined from completely driven applicable WLTP city test cycles of the consecutive cycle Type 1 test procedure, Wh/km;

  • and

    ECDC,city=∑n cityj= 1ECDC,city,j×Kcity,j

    where:

    ECDC,city,j
  • is the electric energy consumption for the applicable WLTP city test cycle j of the consecutive cycle Type 1 test procedure according to paragraph 4.3. of this Sub-Annex, Wh/km;

  • Kcity,j
  • is the weighting factor for the applicable WLTP city test cycle j of the consecutive cycle Type 1 test procedure;

  • j
  • is the index number of the applicable WLTP city test cycle;

  • ncity
  • is the whole number of complete applicable WLTP city test cycles driven;

  • and

    Kcity,1=ΔEREESS,city,1UBECCP and Kcity,j=1− Kcity,1ncity− 1 for j=2 … ncity

    where:

    ΔEREESS,city,1
  • is the electric energy change of all REESSs during the first applicable WLTP city test cycle of the consecutive cycle Type 1 test procedure, Wh.

  • Notes on Division 4.4.2

    Textual amendments

    F1

    Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).