OpenLegislation

Division 4.4.2.2.1 The pure electric range for the applicable WLTP test cycle PERWLTP for PEVs shall be calculated from the Type 1 test as described in paragraph 3.4.4.1. of this Sub-Annex using the following equations:

Original text. Later amendments are not shown.

PERWLTC=UBECCPECDC,WLTC

where:

UBECCP
  • is the usable REESS energy determined from the beginning of the consecutive cycle Type 1 test procedure until the break-off criterion according to paragraph 3.4.4.1.3. of this Sub-Annex is reached, Wh;

  • ECDC,WLTC
  • is the electric energy consumption for the applicable WLTP test cycle determined from completely driven applicable WLTP test cycles of the consecutive cycle Type 1 test procedure, Wh/km;

  • and

    UBECCP=∑kj= 1 ΔEREESS,j

    where:

    ΔEREESS,j
  • is the electric energy change of all REESSs during phase j of the consecutive cycle Type 1 test procedure, Wh;

  • j
  • is the index number of the phase considered;

  • k
  • is the number of phases driven from the beginning up to and including the phase where the break-off criterion is reached;

  • and

    ECDC,WLTC=∑nWLTCj= 1 ECDC,WLTC,j× KWLTC,j

    where:

    ECDC,WLTC,j
  • is the electric energy consumption for the applicable WLTP test cycle j of the consecutive cycle Type 1 test procedure according to paragraph 4.3. of this Sub-Annex, Wh/km;

  • KWLTC,j
  • is the weighting factor for the applicable WLTP test cycle j of the consecutive cycle Type 1 test procedure;

  • j
  • is the index number of the applicable WLTP test cycle;

  • nWLTC
  • is the whole number of complete applicable WLTP test cycles driven;

  • and

    KWLTC,1=ΔEREESS,WLTC,1UBECCP and KWLTC,j=1− KWLTC,1nWLTC− 1 for j=2 … nWLTC

    where:

    ΔEREESS,WLTC,1
  • is the electric energy change of all REESSs during the first applicable WLTP test cycle of the consecutive Type 1 test cycle procedure, Wh.

  • Notes on Division 4.4.2

    Textual amendments

    F1

    Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).