Division 4.6.2 Stepwise procedure for calculating the final charge-sustaining and charge-depleting weighted test results of the Type 1 testF1

The results shall be calculated in the order described in Table A8/9. All applicable results in the column ‘Output’ shall be recorded. The column ‘Process’ describes the paragraphs to be used for calculation or contains additional calculations.

For the purpose of this table, the following nomenclature within the equations and results is used:

considered period is the complete applicable test cycle;

considered period is the applicable cycle phase;

applicable criteria emission component (except for CO₂);

index for the considered period;

charge-sustaining;

charge-depleting;

CO₂

CO₂ mass emission;

REESS

Rechargeable Electric Energy Storage System.

Table A8/9

Calculation of final charge-depleting and charge-sustaining weighted values

Source	Input	Process	Output	Step no.
Output step 1, Table A8/8	M_i,CD,j, g/km; PN_CD,j, particles per kilometer; PM_CD,c, mg/km; M_CO2,CD,j, g/km; ΔE_REESS,j, Wh; d_j, km; AER, km; E_AC, Wh;	Input from CD and CS postprocessing.	M_i,CD,j, g/km; PN_CD,j, particles per kilometer; PM_CD,c, mg/km; M_CO2,CD,j, g/km; ΔE_REESS,j, Wh; d_j, km; AER, km; E_AC, Wh; AER_city,ave, km; n_veh; R_CDC, km; n_veh,L; n_veh,H; UF_phase,j; UF_cycle,c; M_i,CS,c,6, g/km; M_CO2,CS, g/km;	1
Output step 7, Table A8/8	AER_city,ave, km;
Output step 3, Table A8/8	n_veh; R_CDC, km;
Output step 4, Table A8/8	n_veh,L; n_veh,H;
Output step 8, Table A8/8	UF_phase,j; UF_cycle,c;
Output step 6, Table A8/5	M_i,CS,c,6, g/km;
Output step 7, Table A8/5	M_CO2,CS, g/km;
		Output in the case of CD is available for each CD test. Output in the case of CS is available once due to CS test averaged values. In the case that the interpolation method is applied, the output (except of K_CO2) is available for vehicle H, L and, if applicable, M.
	K_CO2, (g/km)/(Wh/km).	CO₂ mass emission correction coefficient K_CO2 might be necessary in accordance with Appendix 2 to this Sub-Annex.	K_CO2, (g/km)/(Wh/km).
Output step 1,	M_i,CD,j, g/km; PN_CD,j, particles per kilometer; PM_CD,c, mg/km; n_veh; n_veh,L; UF_phase,j; UF_cycle,c; M_i,CS,c,6, g/km;	Calculation of weighted emission (except M_CO2,weighted) compounds in accordance with paragraphs 4.1.3.1. to 4.1.3.3. of this Sub-Annex. Remark: M_i,CS,c,6 includes PN_CS,c and PM_CS,c. Output is available for each CD test. In the case that the interpolation method is applied, the output is available for each vehicle L, H and, if applicable, M.	M_i,weighted, g/km; PN_weighted, particles per kilometer; PM_weighted, mg/km;	2
Output step 1,	M_CO2,CD,j, g/km; ΔE_REESS,j, Wh; d_j, km; n_veh; R_CDC, km M_CO2,CS, g/km;	Calculation of equivalent all-electric range in accordance with paragraphs 4.4.4.1. and 4.4.4.2. of this Sub-Annex, and actual charge-depleting range in accordance with paragraph 4.4.5. of this Sub-Annex. Output is available for each CD test. In the case that the interpolation method is applied, the output is available for each vehicle L, H and, if applicable, M.	EAER, km; EAER_p, km; R_CDA, km.	3
Output step 1	AER, km;	Output is available for each CD test. In the case that the interpolation method is applied, check the availability of AER interpolation between vehicle H, L and, if applicable, M in accordance with paragraph 4.5.7.1. of this Sub-Annex. If the interpolation method is used, each test shall fulfil the requirement.	AER-interpolation availability.	4
Output step 3	R_CDA, km.		AER-interpolation availability.	4
Output step 1	AER, km.	Averaging AER and AER declaration. The declared AER shall be rounded as defined in Table A6/1. In the case that the interpolation method is applied and the AER-interpolation availability criterion is fulfilled, the output is available for each vehicle L, H and if applicable, M. If the criterion is not fulfilled, AER of vehicle H shall be applied for the whole interpolation family.	AER_ave, km; AER_dec, km.	5
Output step 1	M_i,CD,j, g/km; M_CO2,CD,j, g/km; n_veh; n_veh,L; UF_phase,j; M_i,CS,c,6, g/km; M_CO2,CS, g/km.	Calculation of weighted CO₂ mass emission and fuel consumption in accordance with paragraphs 4.1.3.1. and 4.2.3. of this Sub-Annex. Output is available for each CD test. In the case that the interpolation method is applied, n_veh,L cycles shall be used. With reference to paragraph 4.1.2. of this Sub-Annex, M_CO2,CD,j of the confirmation cycle shall be corrected in accordance with Appendix 2 to this Sub-Annex. In the case that the interpolation method is applied, the output is available for each vehicle L, H and, if applicable, M.	M_CO2,weighted, g/km; FC_weighted, l/100 km;	6
Output step 1	E_AC, Wh;	Calculation of the electric energy consumption based in EAER in accordance with paragraphs 4.3.3.1. and 4.3.3.2. of this Sub-Annex. Output is available for each CD test. In the case that the interpolation method is applied, the output is available for each vehicle L, H and, if applicable, M.	EC, Wh/km; EC_p, Wh/km;	7
Output step 3	EAER, km; EAER_p, km;		EC, Wh/km; EC_p, Wh/km;	7
Output step 1	AER_{city, ave}, km;	Averaging and intermediate rounding. In the case that the interpolation method is applied, the output is available for each vehicle L, H and, if applicable, M.	AER_city,final, km; M_{CO2,weighted,final}, g/km; FC_{weighted,final}, l/100 km; EC_final, Wh/km; EC_p,final, Wh/km; EAER_final, km; EAER_p,final, km.	8
Output step 6	M_CO2,weighted, g/km; FC_weighted, l/100 km;
Output step 7	EC, Wh/km; EC_p, Wh/km;
Output step 3	EAER, km; EAER_p, km.
Output step 5	AER_ave, km;	Interpolation of individual values based on input from vehicle low, medium and high in accordance with paragraph 4.5. of this Sub-Annex, and final rounding. AER_ind shall be rounded as defined in Table A8/2. Output available for individual vehicles.	AER_ind, km; AER_city,ind, km; M_{CO2,weighted,ind}, g/km; FC_weighted,ind, l/100 km; EC_ind, Wh/km; EC_p,ind, Wh/km; EAER_ind, km; EAER_p,ind, km.	9
Output step 8	AER_city,final, km; M_{CO2,weighted,final}, g/km; FC_{weighted,final}, l/100 km; EC_final, Wh/km; EC_p,final, Wh/km; EAER_final, km; EAER_p,final, km;
Output step 4	AER-interpolation availability.

Annotations

Textual amendments

F1: Inserted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).