OpenLegislation

Division 5.6.3 Interpolation family for PEVs

Original text. Later amendments are not shown.

Only PEVs that are identical with respect to the following electric powertrain/transmission characteristics may be part of the same interpolation family:

  1. (a)

    Type and number of electric machines (construction type (asynchronous/ synchronous, etc.), type of coolant (air, liquid) and any other characteristics having a non-negligible influence on electric energy consumption and range under WLTP conditions;

  2. (b)

    Type of traction REESS (model, capacity, nominal voltage, nominal power, type of coolant (air, liquid));

  3. (c)

    Transmission type (e.g. manual, automatic, CVT) and transmission model (e.g. torque rating, number of gears, numbers of clutches, etc.);

  4. (d)

    Number of powered axles;

  5. (e)

    F1Type of electric energy converter between the electric machine and traction REESS, between the traction REESS and low voltage power supply and between the recharge-plug-in and traction REESS, and any other characteristics having a non-negligible influence on electric energy consumption and range under WLTP conditions;

  6. (f)

    Operation strategy of all components influencing the electric energy consumption within the powertrain;

  7. (g)

    n/v ratios (engine rotational speed divided by vehicle speed). This requirement shall be considered fulfilled if, for all transmission ratios concerned, the difference with respect to the n/v ratios of the most commonly installed transmission type and model is within 8 per cent.

Annotations

Textual amendments

F1

Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).