Appendix 12

United Kingdom

Input parameters for the simulation tool

Introduction

This Appendix describes the list of parameters to be provided by the transmission, torque converter (TC), other torque transferring components (OTTC) and additional driveline components (ADC) manufacturer as input to the simulation tool. The applicable XML schema as well as example data are available at the dedicated electronic distribution platform.

Definitions

(1) ‘Parameter ID’:

Unique identifier as used in ‘Simulation tool’ for a specific input parameter or set of input data

(2) ‘Type’:

Data type of the parameter

string …

sequence of characters in ISO8859-1 encoding

token …

sequence of characters in ISO8859-1 encoding, no leading/trailing whitespace

date …

date and time in UTC time in the format: YYYY-MM-DDTHH:MM:SSZ with italic letters denoting fixed characters e.g. ‘2002-05-30T09:30:10Z’

integer …

value with an integral data type, no leading zeros, e.g. ‘1800’

double, X …

fractional number with exactly X digits after the decimal sign (‘.’) and no leading zeros e.g. for ‘double, 2’: ‘2345.67’; for ‘double, 4’: ‘45.6780’

(3) ‘Unit’ …

physical unit of the parameter

Set of input parameters

F1Table 1

Input parameters ‘ Transmission/General ’

Parameter name	Parameter ID	Type	Unit	Description/Reference
DCT shall be declared as transmission type AMT.
Manufacturer	P205	token	[-]
Model	P206	token	[-]
CertificationNumber	P207	token	[-]
Date	P208	dateTime	[-]	Date and time when the component-hash is created
AppVersion	P209	token	[-]
TransmissionType	P076	string	[-]	Allowed values ^f1 : ‘SMT’, ‘AMT’, ‘APT-S’, ‘APT-P’
MainCertificationMethod	P254	string	[-]	Allowed values: ‘ Option 1 ’ , ‘ Option 2 ’ , ‘ Option 3 ’ , ‘ Standard values ’

Table 2

Input parameters ‘Transmission/Gears’ per gear

Parameter name	Parameter ID	Type	Unit	Description/Reference
GearNumber	P199	integer	[-]
Ratio	P078	double, 3	[-]
MaxTorque	P157	integer	[Nm]	optional
MaxSpeed	P194	integer	[1/min]	optional

Table 3

Input parameters ‘Transmission/LossMap’ per gear and for each grid point in the loss map

Parameter name	Parameter ID	Type	Unit
InputSpeed	P096	double, 2	[1/min]
InputTorque	P097	double, 2	[Nm]
TorqueLoss	P098	double, 2	[Nm]

Table 4

Input parameters ‘TorqueConverter/General’

Parameter name	Parameter ID	Type	Unit	Description/Reference
Manufacturer	P210	token	[-]
Model	P211	token	[-]
CertificationNumber	P212	token	[-]
Date	P213	dateTime	[-]	Date and time when the component-hash is created
AppVersion	P214	string	[-]
CertificationMethod	P257	string	[-]	Allowed values: ‘Measured’, ‘Standard values’

Table 5

Input parameters ‘TorqueConverter/Characteristics’ for each grid point in the characteristic curve

Parameter name	Parameter ID	Type	Unit
SpeedRatio	P099	double, 4	[-]
TorqueRatio	P100	double, 4	[-]
InputTorqueRef	P101	double, 2	[Nm]

Table 6

Input parameters ‘Angledrive/General’ (only required if component applicable)

Parameter name	Parameter ID	Type	Unit	Description/Reference
Manufacturer	P220	token	[-]
Model	P221	token	[-]
CertificationNumber	P222	token	[-]
Date	P223	dateTime	[-]	Date and time when the component-hash is created
AppVersion	P224	string	[-]
Ratio	P176	double, 3	[-]
CertificationMethod	P258	string	[-]	Allowed values: ‘Option 1’, ‘Option 2’, ‘Option 3’, ‘Standard values’

Table 7

Input parameters ‘Angledrive/LossMap’ for each grid point in the loss map (only required if component applicable)

Parameter name	Parameter ID	Type	Unit
InputSpeed	P173	double, 2	[1/min]
InputTorque	P174	double, 2	[Nm]
TorqueLoss	P175	double, 2	[Nm]

Table 8

Input parameters ‘Retarder/General’ (only required if component applicable)

Parameter name	Parameter ID	Type	Unit	Description/Reference
Manufacturer	P225	token	[-]
Model	P226	token	[-]
CertificationNumber	P227	token	[-]
Date	P228	dateTime	[-]	Date and time when the component-hash is created
AppVersion	P229	string	[-]
CertificationMethod	P255	string	[-]	Allowed values: ‘Measured’, ‘Standard values’

Table 9

Input parameters ‘Retarder/LossMap’ for each grid point in the characteristic curve (only required if component applicable)

Parameter name	Parameter ID	Type	Unit	Description/Reference
RetarderSpeed	P057	double, 2	[1/min]
TorqueLoss	P058	double, 2	[Nm]

Annotations

Textual amendments

F1: Substituted by Commission Regulation (EU) 2019/318 of 19 February 2019 amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles (Text with EEA relevance).

Footnotes

f1: DCT shall be declared as transmission type AMT.