Appendix 5
United Kingdom
Additional driveline components (ADC) information document
| Information document no.: | Issue: Date of issue: Date of Amendment: |
pursuant to …
F1ADC type/family (if applicable):
…
0.
GENERAL
0.1
Name and address of manufacturer
0.2
Make (trade name of manufacturer):
0.3
ADC type:
0.4
ADC family:
0.5
ADC type as separate technical unit/ADC family as separate technical unit
0.6
Commercial name(s) (if available):
0.7
Means of identification of model, if marked on the ADC:
0.8
In the case of components and separate technical units, location and method of affixing of the F2GB approval mark:
0.9
Name(s) and address(es) of assembly plant(s):
0.10
Name and address of the manufacturer's representative:
PART 1
ESSENTIAL CHARACTERISTICS OF THE (PARENT) ADC AND THE ADC TYPES WITHIN AN ADC FAMILY
| Parent-ADC | Family member | ||||
| #1 | #2 | #3 | |||
F30.0
GENERAL
0.1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.9.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.0
SPECIFIC ADC/ANGLE DRIVE INFORMATION
1.1
Gear ratio and gearscheme
1.2
Angle between input/output shaft
1.3
Type of bearings at corresponding positions
1.4
Number of teeth per gearwheel
1.5
Single gear width
1.6
Number of dynamic shaft seals
1.7
Oil viscosity (± 10 %)
1.8
Surface roughness of the teeth
1.9
Specified oil level in reference to central axis and in accordance with the drawing specification (based on average value between lower and upper tolerance) in static or running condition. The oil level is considered as equal if all rotating transmission parts (except for the oil pump and the drive thereof) are located above the specified oil level
1.10
Oil level within (± 1mm).
LIST OF ATTACHMENTS
| No.: | Description: | Date of issue: |
|---|---|---|
| 1 | Information on ADC test conditions | … |
| 2 | … |
Annotations
Textual amendments
- F1
- F2
Words in Annex 6 Appendix 5 point 0.8 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 83(5)(d)
- F3