OpenLegislation

Division 6.1.1 Case A: Measurement on a separate angle drive

United Kingdom

Original text. Later amendments are not shown.

For the torque loss measurement of a separate angle drive, the three options as defined for the determination of the transmission losses shall apply:

Option 1

  • Measured torque independent losses and calculated torque dependent losses (Transmission test option 1)

    • Option 2

  • Measured torque independent losses and measured torque dependent losses at full load (Transmission test option 2)

    • Option 3

  • Measurement under full load points (Transmission test option 3)

    • The measurement of the angle drive losses shall follow the procedure described for the related transmission test option in paragraph 3 diverging in the following requirements:

    1. 6.1.1.1Applicable speed range:
    2. 6.1.1.2Division 6.1.1.2