OpenLegislation

Division 6.1.2.1

United Kingdom

Original text. Later amendments are not shown.

The manufacturer may separate the angle drive losses from the total transmission losses by testing in the order as described below:

  1. (1)

    The torque loss for the complete transmission including angle drive shall be measured as defined for the applicable transmission testing option

    = Tl,in,withad

  2. (2)

    The angle drive and related parts shall be replaced with parts required for the equivalent transmission variant without angle drive. The measurement of point (1) shall be repeated.

    = Tl,in,withoutad

  3. (3)

    The torque loss for the angle drive system shall be determined by calculating the differences between the two test data sets

    = Tl,in,adsys = Tl,in,withad – Tl,in,withoutad