Appendix 2
United Kingdom
Axle information document
| Information document no.: | Issue: Date of issue: Date of Amendment: |
pursuant to …
F1Axle type/family (if applicable):
…
0.
GENERAL
0.1
Name and address of manufacturer
0.2
Make (trade name of manufacturer):
0.3
Axle type:
0.4
Axle family (if applicable):
0.5
Axle type as separate technical unit / Axle family as separate technical unit
0.6
Commercial name(s) (if available):
0.7
Means of identification of type, if marked on the axle:
0.8
In the case of components and separate technical units, location and method of affixing of the certification mark:
0.9
Name(s) and address(es) of assembly plant(s):
0.10
Name and address of the manufacturer's representative:
PART 1
ESSENTIAL CHARACTERISTICS OF THE (PARENT) AXLE AND THE AXLE TYPES WITHIN AN AXLE FAMILY
| Parent axle | Family member | ||||
| or axle type | #1 | #2 | #3 | ||
F20.0
GENERAL
0.1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.9.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.0
SPECIFIC AXLE INFORMATION
| 1.1 | Axle line (SR, HR, SP, SRT, HRT) | … | … | … | … | ||
| 1.2 | Axle gear ratio | … | … | … | … | ||
| 1.3 | Axle housing (number/ID/drawing) | … | … | … | … | ||
| 1.4 | Gear specifications | … | … | … | |||
| 1.4.1 | Crown wheel diameter; [mm] | … | … | ||||
| 1.4.2 | Vertical offset pinion/crown wheel; [mm] | … |
1.4.3
Pinion angle with respect to horizontal plane; [°]
1.4.4
For portal axles only:
Angle between pinion axle and crown wheel axle; [°]
1.4.5
Teeth number of pinion
1.4.6
Teeth number of crown gear
1.4.7
Horizontal offset of pinion; [mm]
1.4.8
Horizontal offset of crown wheel; [mm]
1.5
Oil volume; [cm3]
1.6
Oil level; [mm]
1.7
Oil specification
1.8
Bearing type (number/ID/drawing)
1.9
Seal type (main diameter, lip number); [mm]
1.10.
Wheel ends (number/ID/drawing)
1.10.1
Bearing type (number/ID/drawing)
1.10.2
Seal type (main diameter, lip number); [mm]
1.10.3
Grease type
1.11.
Number of planetary/spur gears
1.12
Smallest width of planetary/spur gears; [mm]
1.13
Gear ratio of hub reduction
LIST OF ATTACHMENTS
| No.: | Description: | Date of issue: |
|---|---|---|
| 1 | … | … |
| 2 | … |
Annotations
Textual amendments
- F1
- F2