Appendix 6
United Kingdom
Input parameters for the simulation tool
Introduction
This Appendix describes the list of parameters to be provided by the component manufacturer as input to the simulation tool. The applicable XML schema as well as example data are available at the dedicated electronic distribution platform.
Definitions
Unique identifier as used in the simulation tool for a specific input parameter or set of input data
Data type of the parameter
string …sequence of characters in ISO8859-1 encoding
sequence of characters in ISO8859-1 encoding, no leading/trailing whitespace
date and time in UTC time in the format: YYYY-MM-DD T HH:MM:SS Z with italic letters denoting fixed characters e.g. ‘2002-05-30T09:30:10Z’
value with an integral data type, no leading zeros, e.g. ‘1800’
fractional number with exactly X digits after the decimal sign (‘.’) and no leading zeros e.g. for ‘double, 2’: ‘2345.67’; for ‘double, 4’: ‘45.6780’
physical unit of the parameter
Set of input parameters
Table 1
Input parameters ‘Axlegear/General’
| Parameter name | Param ID | Type | Unit | Description/Reference |
|---|---|---|---|---|
| Manufacturer | P215 | token | [-] | |
| Model | P216 | token | [-] | |
| CertificationNumber | P217 | token | [-] | |
| Date | P218 | dateTime | [-] | Date and time when the component-hash is created |
| AppVersion | P219 | token | [-] | |
| LineType | P253 | string | [-] | Allowed values: ‘Single reduction axle’, ‘Single portal axle’, ‘Hub reduction axle’, ‘Single reduction tandem axle’, ‘Hub reduction tandem axle’ |
| Ratio | P150 | double, 3 | [-] | |
| CertificationMethod | P256 | string | [-] | Allowed values: ‘Measured’, ‘Standard values’ |
Table 2
Input parameters ‘Axlegear/LossMap’ for each grid point in the loss map
| Parameter name | Param ID | Type | Unit | Description/Reference |
|---|---|---|---|---|
| InputSpeed | P151 | double, 2 | [1/min] | |
| InputTorque | P152 | double, 2 | [Nm] | |
| TorqueLoss | P153 | double, 2 | [Nm] |