OpenLegislation

Division 6.1.5.7 Boundary conditions for the verification testF1

United Kingdom

Original text. Later amendments are not shown.

The boundary conditions to be met for a valid verification test are set in Table 3.

If the vehicle passes the verification test in accordance with point 7, the test shall be set valid even if the following conditions are not met:

  • undercut of minimum values for parameter No 1, 2, 6, 9 in Table 3,

  • exceedance of maximum values for parameter No 3, 4, 5, 7, 8, 10, 12 in Table 3.

Table 3

Parameters for a valid verification test

Or maximum vehicle speed if lower than 70 km/h

No Parameter Min. Max. Applicable for
1 Warm up [minutes] 60
2 Average velocity at warm up [km/h] 70 f1 100
3 Fuel consumption measurement duration [minutes] 80 120
4 Distance based share urban driving 2 % 8 % vehicle groups 4, 5, 9, 10
5 Distance based share rural driving 7 % 13 %
6 Distance based share motorway driving 74 % — vehicle groups 4, 5, 9, 10
7 Time share of idling at stand still 5 %
8 Average ambient temperature 5 °C 30 °C
9 Road condition dry 100 %
10 Road condition snow or ice 0 %
11 Seal level of the route [m] 0 800
12 Duration of continuous idling at stand still [minutes] 3

In case of extraordinary traffic conditions, the verification test shall be repeated.

Annotations

Textual amendments

F1

Inserted by Commission Regulation (EU) 2019/318 of 19 February 2019 amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles (Text with EEA relevance).

Footnotes

f1

Or maximum vehicle speed if lower than 70 km/h