OpenLegislation

Division 2.3.1.1.1 Calculation based on sample ratio

United Kingdom

Original text. Later amendments are not shown.

The particulate emission over the cycle m PM [g] shall be calculated by means of equation (7-42):

m PM = m f r s × 1000 (7-42)

where:

m f
  • particulate mass sampled over the cycle [mg]

  • r s
  • average sample ratio over the test cycle [-]

  • with:

    r s = m se m ew × m sep m sed (7-43)

    Where:

    m se
  • sample mass of raw exhaust gas over the cycle [kg]

  • m ew
  • total mass of raw exhaust gas over the cycle [kg]

  • m sep
  • mass of diluted exhaust gas passing the particulate collection filters [kg]

  • m sed
  • mass of diluted exhaust gas passing the dilution tunnel [kg]

  • In case of the total sampling type system, m sep and m sed are identical.

    Notes on Division 2.3.1

    Textual amendments

    F1

    Substituted by Commission Delegated Regulation (EU) 2018/989 of 18 May 2018 amending and correcting Delegated Regulation (EU) 2017/654 supplementing Regulation (EU) 2016/1628 of the European Parliament and of the Council with regard to technical and general requirements relating to emission limits and type-approval for internal combustion engines for non-road mobile machinery (Text with EEA relevance).