Division 1.6 Verification procedure for requirements established in Annex II, point C.3F1

The model shall be considered to comply with the applicable requirements if:

1. (a)

   within 4 hours in on mode following the last user interaction or within 1 hour if a room presence sensor is enabled and no movement is detected, the television automatically switches from on mode to standby mode or off mode or networked standby mode, if enabled, or another mode which does not exceed the applicable power demand requirements for standby mode. Member State authorities shall use the applicable procedure to measure the power demand after the automatic power down functionality switches the television into the applicable power mode; and

2. (b)

   the function is set as default; and

3. (c)

   in on mode, the television shows an alert message before automatically switching from on mode to the applicable mode; and

4. (d)

   if the television provides a function allowing the user to modify the 4-hour period for automatic mode transitions detailed in (a), a warning message is prompted about a potential increase in energy use and a confirmation of the new setting is requested when an extension beyond the 4-hour period or disabling is selected; and

5. (e)

   if the television is equipped with a room presence sensor, the automatic transition from on mode into any mode as detailed in (a) applies if no presence is detected for no more than 1 hour; and

6. (f)

   in televisions with various selectable input sources the power management protocols of the signal source selected is prioritised over those default power management mechanisms described in (a) above.