Paragraph 7 Putting into useF1
Table 5
| Accuracy class | Types of Measuring system | |
|---|---|---|
| 0.3 | Measuring systems on pipeline | |
| 0.5 | All measuring systems if not differently stated elsewhere in this Table, in particular: | |
| fuel dispensers (not for liquefied gases), | ||
| measuring systems on road tankers for liquids of low viscosity (< 20 mPa.s) | ||
| 1.0 | Measuring systems for liquefied gases under pressure measured at a temperature equal to or above – 10 °C | |
| Measuring systems normally in class 0.3 or 0.5 but used for liquids | ||
| whose temperature is less than – 10 °C or greater than 50 °C | ||
| whose dynamic viscosity is higher than 1,000 mPa.s | ||
| whose maximum volumetric flowrate is not higher than 20 L/h | ||
| 1.5 | Measuring systems for liquefied gases under pressure measured at a temperature below – 10 °C (other than cryogenic liquids) | |
| 2.5 | Measuring systems for cryogenic liquids (temperature below – 153 °C) | |
Annotations
Textual amendments
- F1
Schs. 1A-1K inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 27 para. 49 (with Sch. 27 para. 50(a)) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)