Regulation 17 Controls for starting or making a significant change in operating conditions
The employer shall ensure that, where appropriate, work equipment is provided with one or more controls for the purpose of—
starting the work equipment (including re-starting after a stoppage for any reason); or
controlling any change in the speed, pressure or other operating conditions of the work equipment where such conditions after the change result in risk to health and safety which is greater than, or of a different nature from, such risk before the change.
Subject to paragraph (3), the employer shall ensure that, where a control is required by paragraph (1), it shall not be possible to perform any operation mentioned in sub-paragraph (a) or (b) of that paragraph, except by deliberate action on such control.
Paragraph (1) shall not apply to re-starting or changing operating conditions as a result of the normal operating cycle of an automatic device.
Notes on the whole SI
Textual amendments
- F1
1972 c.68; by virtue of the amendment of section 1(2) of the European Communities Act by section 1 of the European Economic Area Act 1993 (c.51) regulations may be made under section 2(2) of the European Communities Act to implement obligations of the United Kingdom created or arising by or under the Agreement on the European Economic Area signed at Oporto on 2nd May 1992 (Cm 2073) as adjusted by the Protocol to the Agreement signed at Brussels on 17th March 1993 (Cm 2183).
- F2
1995 c.21; sections 85 and 86 were amended by the Merchant Shipping and Maritime Security Act 1997 (c.28), section 8, and are applied to hovercraft by the Hovercraft (Application of Enactments) Order 1989 (S.I. 1989/1350) to which there are amendments not relevant to these Regulations.
- F3