Regulation 18 Stop controls
The employer shall ensure that, where appropriate, work equipment is provided with one or more readily accessible controls the operation of which will bring the work equipment to a safe condition in a safe manner.
The requirement in paragraph (1) shall include the provision of controls which are capable of bringing the work equipment to a complete stop as well as switching off all sources of energy to, and from, the work equipment.
Any control required by paragraph (1) shall operate in priority to any control which starts or changes the operating conditions of the work equipment.
Notes on the whole SI
Textual amendments
- F1
1972 c.68; by virtue of the amendment of section 1(2) of the European Communities Act by section 1 of the European Economic Area Act 1993 (c.51) regulations may be made under section 2(2) of the European Communities Act to implement obligations of the United Kingdom created or arising by or under the Agreement on the European Economic Area signed at Oporto on 2nd May 1992 (Cm 2073) as adjusted by the Protocol to the Agreement signed at Brussels on 17th March 1993 (Cm 2183).
- F2
1995 c.21; sections 85 and 86 were amended by the Merchant Shipping and Maritime Security Act 1997 (c.28), section 8, and are applied to hovercraft by the Hovercraft (Application of Enactments) Order 1989 (S.I. 1989/1350) to which there are amendments not relevant to these Regulations.
- F3