Article 2 Port boundary

For the purposes of the definition of “port” in regulation 2 of the Port Security Regulations 2009 M1, the boundary of the Port of Oban is defined as follows.

The boundary is generally shown by the inner edge of the red line on the plan in Part 1 of Schedule 1.

The points on the line designated by letters of the alphabet have the following World Geodetic System 1984 (WGS84) coordinates—

• A 56^O24`41.60”N, 005<sup>O</sup>28`57.73”W

• B 56^O24`55.59”N, 005<sup>O</sup>28`34.31”W

• C 56^O24`56.67”N, 005<sup>O</sup>28`30.67”W

• D 56^O24`56.91”N, 005<sup>O</sup>28`26.49”W

Within the rectangular areas marked “1”, “2” and “3” on the plan in Part 1 of Schedule 1, the boundary is more particularly shown by the red lines on each of the corresponding inset plans, in Part 2 of Schedule 1, headed respectively “Inset Plan 1”, “Inset Plan 2” and “Inset Plan 3”.

The green hatched areas on the plan in Part 1 of Schedule 1 are excluded from the Port of Oban.

Where the red line runs along a beach or foreshore, the boundary runs along the edge of the land on that beach or foreshore which is below the level of mean high water springs.